Very Deep Dish Wheels
#38
Evolved Member
iTrader: (4)
Give someone like Wheels Boutique a call. They sell custom wheels from HRE. I'm sure they could get you a staggered setup with a deep dish in the back. Had HRE's on my 350Z with a 3" lip and the same on the Shelby. HRE's are not cheep though, be prepared to pay somewhere around 6500.00 for a tire wheel combo (That was 20's though).
#39
Newbie
Thread Starter
Join Date: Nov 2011
Location: United States
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
pictures when you get them
well, looks like i wont be the only one
Give someone like Wheels Boutique a call. They sell custom wheels from HRE. I'm sure they could get you a staggered setup with a deep dish in the back. Had HRE's on my 350Z with a 3" lip and the same on the Shelby. HRE's are not cheep though, be prepared to pay somewhere around 6500.00 for a tire wheel combo (That was 20's though).
#40
#41
Evolving Member
iTrader: (7)
Join Date: Aug 2008
Location: canada
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
do a search on the evo x with vs xx wheels, the best looking evo ever, I have had the following wheels on my evo, enkei gtc01, ssr, work xc8, advan rz, adv-1 7.1, all very concave wheels and I never taught the evo would look good with a lip wheel, I was at a car show and this evo shows up with work vs xx wheels, it was and is te best look I have ever seen on an evo, classy yet aggressive, like I said go in the vanity section and look for this thread
https://www.evolutionm.net/forums/ev...-xx-evo-x.html
https://www.evolutionm.net/forums/ev...-xx-evo-x.html
#43
Newbie
Thread Starter
Join Date: Nov 2011
Location: United States
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
do a search on the evo x with vs xx wheels, the best looking evo ever, I have had the following wheels on my evo, enkei gtc01, ssr, work xc8, advan rz, adv-1 7.1, all very concave wheels and I never taught the evo would look good with a lip wheel, I was at a car show and this evo shows up with work vs xx wheels, it was and is te best look I have ever seen on an evo, classy yet aggressive, like I said go in the vanity section and look for this thread
https://www.evolutionm.net/forums/ev...-xx-evo-x.html
https://www.evolutionm.net/forums/ev...-xx-evo-x.html
i dont quite understand
#44
Evolving Member
iTrader: (7)
Join Date: Aug 2008
Location: canada
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
you can order the work bromsher with a step lip, if you are getting a rim with a lip, do your research as not all wheels are equal, from al the cars i have owned , I had dpe and the barrels are garbage, bent easily, I had hre and they are really good but very expensive, adv-1 wheels the finish is garbage, it had white spot in the finish after a year, i had ccw and heavy wheels, I forged are really good, now i am considering a set of rennen forged wheels see how that goes, but as for work wheels they have one of the best barrels in the business, other companies buy their barrels to build their wheels, so cannot go wrong with the work wheels but they are very expensive, when I got a set of vsxx priced it was 3900 plus 390 for spacers, so for that price you can get a set of adv-1, rennen dpe etc, but like i said please look into all the companies before you order
#45
Newbie
iTrader: (2)
Join Date: Oct 2008
Location: Los Angeles, CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Problem with fitting deep dish wheels is that the face of the wheel is usually flat (excluding work meister style) which hits our stock brembo calipers. That red car looks amazing and different.