LRM1981

iTrader: (16)

Not too much different than the stock tires, I have the OEM clear film that covers my rear doors which does a great job protecting my paint.

evoxdreamz

iTrader: (2)

sorry to bump the thread but, i was curious... Do you have a pic to show where u put the wheel weights are?

evodave

iTrader: (546)

i will have pics of a set of these bad boys on my evo by next week (friday/saturday).

LRM1981

iTrader: (16)

Clearance problems with your Brembos?

I ended up having to get them balanced with regular wheel weights around the outside and inside of the wheels, since the clearance was too tight to fit the other type of weights (not sure what they're called). Kinda ugly, but not too bad once you paint them.

Anyone else figure out how to properly balance these wheels with the hidden wheel weights? I kid you not, the space between the inside of the wheel and the front Brembo's is probably less than 1mm

MatosEvo

They passed the JWL/VIA regulations recently didn't they? I remember that they did not originally have the logos on them and used to be considered low quality. I like their original design wheels, they should avoid doing imitations of VOlks and such.

cpunlamd

Will these ever come out in white?

WheelDude.com

iTrader: (68)

I do not have a picture of the weights mounted. For all wheel/tire packages we do mount the weights further towards the center of the wheel as caliper clearance is very tight. This method does require slightly more weight however the Rota SVN-R's we've mounted require very little weight in general. Another option is to use clip on weights on the outside.
Every single Rota Wheel released for the Evo (8,9, and X) surpasses JWL/VIA testing standards. This is not something new as we have been carrying Evo specific Rota Wheels for the past 5+ years I have experience with a ton of aftermarket wheels and I would definiately recommend Rota Wheels as they are a quality product.

Here's the Rota SVN-R's in action on the track



Did you just recently pick up an Evo X Carl? You should have said something last time we spoke on the phone, that's awesome if you did We did not have plans to release this model in White however if we get at least 3 people interested I will special order this finish. We currently offer White on the Rota DPT's and also the Rota Grid's for the Evo X


-Dan

glewis1

can you get these in Gold?

cpunlamd

Yeah. I picked up a 2010 Evo X, some butt head rear ended my 07 STI a few weeks back. But Im not new to this forum. I also have an Evo 8.

My Evo X is white and I was thinking of going with white wheels. But I am really leaning towards an 18x10 wheel. What good are the HUGE fenders without filling them right?

timbo299

iTrader: (3)

Im getting a set in a couple weeks but 9.0's I cant roll mine...... oh well!!!

1EVO2NV

Do the 18x9 have less of a lip, and do they sit in a little bit more than the 18x10? Sorry... fitment newb here

1EVO2NV

please post pics?

WheelDude.com

iTrader: (68)

Sounds good! The 18x9 +20 model is still an awesome option for the Evo X and will allow you to easily run OEM 245/40/18's or 265/35/18's on stock fenders
Thanks for sending a PM Freddie! For those also wondering about the two models, the 18x9 +20 model does have a smaller lip. Here's an example of the Rota SVN in 18x9 +20 with a 265/35/18 tire. Direct bolt on fitment with no modifications required

18x9 +20 Flat Black




-Dan

1EVO2NV

Thanks for the replies Dan...Ill be giving you a call when im ready to order!!

to wheeldude and some great looking wheels!!

ripnbst

Does fitting these on a car with just Swift springs require rolling of the fenders?