Help from Those using 265/35/18
#16
Newbie
iTrader: (1)
Join Date: Jan 2009
Location: Windermere, FL
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
The 255/35/18's you had looked small because they are small! Even a 265/35/18 is slightly smaller diameter than stock, so a 255/35/18 is even smaller diameter than that.
Here is my car with 265/35/18 Dunlops on 18x9.5" Enkei RPF1's with Swift springs.
#21
So After driving around some, with people in the back, and some spirited driving, let us know if you have some rubbing or interference issues and what you've done to correct them. This will be much appreciated!!
BTW, Looks really nice!!
BTW, Looks really nice!!
#22
Evolved Member
Thread Starter
iTrader: (16)
Join Date: Jun 2008
Location: Unknown
Posts: 1,431
Likes: 0
Received 0 Likes
on
0 Posts
Thanks on the compliment!
#23
clearance
Monkey,
Hey, I was keeping tabs when you posted months ago on your ROTAs with these 275 wide Falkens. So what have you done with the suspension and everything else you may have done because of rubbing/clearance issues (rolling rr fenders, etc.,.). Just wanted to go with the same wide look you have but did'nt want it to be a pain in the *** if I get these size tires also. If I stay with stock height/suspension will I have any rubbing/clearnace issues? How do you like the tires overall for Daily and occasional spirited driving?
I really appreciate your feedback and input!!
Hey, I was keeping tabs when you posted months ago on your ROTAs with these 275 wide Falkens. So what have you done with the suspension and everything else you may have done because of rubbing/clearance issues (rolling rr fenders, etc.,.). Just wanted to go with the same wide look you have but did'nt want it to be a pain in the *** if I get these size tires also. If I stay with stock height/suspension will I have any rubbing/clearnace issues? How do you like the tires overall for Daily and occasional spirited driving?
I really appreciate your feedback and input!!
I will try and put some people in the back, most of the time its just me in the car. My girl comes with me sometimes but thats about it. I will be getting the fenders rolled soon, I hope it will be Monday. There is some rubbing at FULL wheel lock, fenders are still the same and I have no rubbing in the back. I will keep you all up to date on how she is doing.
Thanks on the compliment!
Thanks on the compliment!
#24
Evolving Member
iTrader: (2)
Join Date: May 2003
Location: San Jose
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
I just put CE28s 18x9.5 +22 with 265/35 AD08s and had to roll the rears. I would like a 275 but they don't make the AD08 in that size. The 265's look good but the car could use a little more meat.
#25
Did you have any clearance issues up front during aggressive driving or during FULL lock turning?
#27
Evolving Member
iTrader: (1)
Join Date: Nov 2003
Location: Redlands
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
looking good, monkey!
my RPF1 18x9.5 is on its way. I plan on putting 275/35 as well and I running on Eibach Prokit. Does it rub in full wheel lock on your setup like delkat? I'm rolling all four corners before I put on the new wheels/tires.
I plan having this camber settings:
Front: -2.0
Rear: -1.0
very slightly? which part of the fender liner did you modify with a heatgun?
my RPF1 18x9.5 is on its way. I plan on putting 275/35 as well and I running on Eibach Prokit. Does it rub in full wheel lock on your setup like delkat? I'm rolling all four corners before I put on the new wheels/tires.
I plan having this camber settings:
Front: -2.0
Rear: -1.0
very slightly? which part of the fender liner did you modify with a heatgun?
Thread
Thread Starter
Forum
Replies
Last Post
Noize
Evo X Tires / Wheels / Brakes / Suspension
28
Jun 14, 2014 07:01 PM
Hakmeister
Evo X Show / Shine
14
Aug 25, 2012 05:38 AM
dambikeracer
Evo Tires / Wheels / Brakes / Suspension
9
Apr 7, 2010 12:22 PM
dbsears
Evo Tires / Wheels / Brakes / Suspension
27
Feb 13, 2008 08:07 PM