Megan racing lowering springs..
#1
Megan racing lowering springs..
Ok so I don't want coilovers so I was thinking about getting the Megan racing springs, 2" front 1.75" rear. Does anyone have these that can post up some pics and how is the ride quality? I know switching to any spring or coilover will affect the ride but all must vary. Thanks!
#3
There is a thread on here about the same thing you're asking...had a brave guinea pig that installed the megan's and others quickly followed after they saw all of the pics and good information. From what I remember, there were no complaints other than the fact you get what you pay for. Search for megan springs and I guarantee something will come up.
#4
There is a thread on here about the same thing you're asking...had a brave guinea pig that installed the megan's and others quickly followed after they saw all of the pics and good information. From what I remember, there were no complaints other than the fact you get what you pay for. Search for megan springs and I guarantee something will come up.
#6
i'm running the megan springs right now
great looking stance, really aggressive drop but the ride is quite bouncy, not terribly bad for a daily driver though
i'm switching to gtworx, too low for the roads here and i want a better quality ride
photo of mine with the megans:
great looking stance, really aggressive drop but the ride is quite bouncy, not terribly bad for a daily driver though
i'm switching to gtworx, too low for the roads here and i want a better quality ride
photo of mine with the megans:
Last edited by rrd; Nov 3, 2012 at 12:43 AM.
#7
How do you like that Rexpeed lip?
Trending Topics
#8
Bouncy bouncy? The stance looks amazing, I wish I could feel it before buyin it. I have swift springs now.
#9
Evolved Member
iTrader: (8)
Joined: Apr 2005
Posts: 9,002
Likes: 11
From: somewhere testing various tires, brakes, and suspensions.
Remember: Struts don't care where they stroke from; they care when they bottom out.
-2 is VERY low and you run a VERY high risk of smashing the valving into the housing.
-2 is VERY low and you run a VERY high risk of smashing the valving into the housing.
Thread
Thread Starter
Forum
Replies
Last Post
PatricksEvilEvo
Evo Tires / Wheels / Brakes / Suspension
19
Dec 13, 2011 09:15 PM
XxLaNcErGTSxX
Evo X Tires / Wheels / Brakes / Suspension
24
Aug 25, 2009 11:31 AM
army685
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
5
Dec 9, 2007 06:02 PM
Meeyatch1
For Sale - Wheels / Tires
5
Dec 2, 2007 08:03 AM