I like zero front toe with flipped camber bolts. About half of the rear toe-in that Mitsu suggests and 2/3 as much camber in the rear as in the front.

 

Ok here is the update so far my friend has different set of rim but same size 18x9.5 +12 265/35/18 on coils 1 finger gap 2.9 camber all around zero toe rubs only very little in rear when going over big bumps on freeway at high speed normally its fine

 

Tomorrow I'm going in for alignment as of now im not rubbing at all only right side rear rubs a little on free way going over bumps. I'LL Check back with camber update

 

So alignment update front I can do 1.1 camber rear 1.9 camber no rubbing at all I did 2 front 2 rear because I'm not lowered that much so everything is good no rubbing no nothing

 

How did you get 1.5* of front camber? We have remove-flip-reinstall camber bolts, not rotate-in-place bolts, so most people can get around 1* or around 2*, but nothing in the middle. IIRC, your first post implied that you don't have upper front plates.

 

Sorry I typed wrong correction 2 all around. Sorry!

 

Are you set on running a 265? You could fit a 245 on a 9.5 inch wide rim just fine.

 

I'm set on running 265 I been driving it around all day yesterday and also today really love it and no problems at all.