EVONation

iTrader: (1)

I'm looking to get a MBC and a flash so many guys have told me that I should get a BOV because of the added boost. Which one is the most usable for a daily? I don't want to be fluttering or stalling....

Thegame

iTrader: (26)

MR. No adjustments, just solid boost. Sounds pretty darn good too with my HKS RS.

j-evo8

iTrader: (5)

Have had my APS on for the past 3 months. Just put it in and go. No idling issues, no stalling, no fluttering, no compressor surge. Works perfect!

EVONation

iTrader: (1)

Nice if anyone else has advice I would love to hear it...

EvoMoto

iTrader: (20)

EVONation - If you want something that provides a nice sound try the Go fast bits or the APS. If you want something stealth try the EVO JDM MR bov, GReddy Type S or the Tomei valve.

Spec'd

iTrader: (16)

How about the JDM MR BOV ?

deadbeatrec

iTrader: (9)

ok the forge is the best diverter valve/bov whatever u want to call it, hands down.

mike1023

iTrader: (11)

how much boost can the JDM MR BOV take anyhow?

evodrifter

I too have a forge, the VTA one, no stalling, no idling issures, the only problem is that there is some minor flutter at low end, but that can be taken car with some adjustment.

deadbeatrec

iTrader: (9)

22psi tops

mike1023

iTrader: (11)

alright and stock turbo can push out how much lol. lets do the math here. is it worth get the jdm mr bov vs a other bov that can hold more boost for later mods.

Erik@MIL.SPEC

iTrader: (94)

I think it depends on the valve. I know of people who pressure tested their plastic stock valve to hold over 20 psi (most people say it leaks around 19). I have seen a few people say the MR is good for 24 to 25 pounds. I suggest you find one and test it.

li1p1aya

iTrader: (1)

APS BOV all the way

mike1023

iTrader: (11)

post some info with it just dont shout out what you have and what every one should have. details. like how much can hold. gosh

midwestmonster

iTrader: (9)

My MR BOV holds 25 psi no problem