evo 7 440hp
Aug 24, 2006, 01:56 AM
#1
Newbie
Thread Starter
Join Date: Aug 2006
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
evo 7 440hp
hi guys, i īm new over here, so maybe this isnīt the right place to get advice, but it seemed like the one
i got my evo 5 years ago, but started to tune it just now. i drove rally (with another car) before and since i stoped, life seemed just doll
car has 440 hp and 620 Nm @ 5200 prm, Essex ballbearing turbo,Hallman boost control, HKS 272 camshafts, custom made head and intake channels, HKS pistons and rods, HKS double plate clucth and flywheel, custom made exhaust 80mm and bosch 250L fuel pump.
the fuel pressure regulator is original (just little tuned) so are the injectors.
I also have original BOV (only turned backwards) k&n cold air intake.
All this is managed with GEMS ecu and Ralliart LCD ecu.
I was wondering do u guys have any ideas, how to get the car to go faster...
today the the best times r just 7,82 @ 1/8 mile and 12, 22 @ 1/4 mile
...i was thinking to change the BOV, most likely to HKS type II.
Any ideas?
i got my evo 5 years ago, but started to tune it just now. i drove rally (with another car) before and since i stoped, life seemed just doll
car has 440 hp and 620 Nm @ 5200 prm, Essex ballbearing turbo,Hallman boost control, HKS 272 camshafts, custom made head and intake channels, HKS pistons and rods, HKS double plate clucth and flywheel, custom made exhaust 80mm and bosch 250L fuel pump.
the fuel pressure regulator is original (just little tuned) so are the injectors.
I also have original BOV (only turned backwards) k&n cold air intake.
All this is managed with GEMS ecu and Ralliart LCD ecu.
I was wondering do u guys have any ideas, how to get the car to go faster...
today the the best times r just 7,82 @ 1/8 mile and 12, 22 @ 1/4 mile
...i was thinking to change the BOV, most likely to HKS type II.
Any ideas?
Last edited by kirju; Aug 24, 2006 at 01:59 AM.
Aug 24, 2006, 03:10 AM
#4
Evolved Member
iTrader: (62)
Join Date: Jul 2005
Location: Nashville, TN
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
thought the same thing as above^... a quick fix, I am not assuming anything, but a LICP, IC and meth would be helpful... not the huge gains of a larger turbo, but enough to notice..what kind of clutch???
Aug 24, 2006, 03:16 AM
#5
Newbie
Thread Starter
Join Date: Aug 2006
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Redline-Z
440 HP and a 12.2, seems low for your numbers
there is something i just donīt know about...
Aug 29, 2006, 09:52 PM
#6
Newbie
Thread Starter
Join Date: Aug 2006
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
bigger turbo can be helpful...sure, but i managed to get 440 out of this one and this is quite ok. the problem is still in the times....12,2 is way to slow.
maybe 1000cc injectors or new ignition system?
come on guys....little help please
maybe 1000cc injectors or new ignition system?
come on guys....little help please
Trending Topics
Aug 29, 2006, 10:09 PM
#8
Evolved Member
iTrader: (14)
Join Date: Nov 2005
Location: newjersey
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
i heard that turning the bov causes problems it wasnt meant to be used that way.how much boost and on what octane was your 440 hp made?what dyno was used for these numbers and are you on the stock ECU?
Aug 29, 2006, 11:11 PM
#9
Newbie
Thread Starter
Join Date: Aug 2006
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scott yo
i heard that turning the bov causes problems it wasnt meant to be used that way.how much boost and on what octane was your 440 hp made?what dyno was used for these numbers and are you on the stock ECU?
the ECU is from GEMS (or i can change to Motec ...in dyno there was no diference in numbers)
iīm using Rallyart thermostat and radiator seal and a bit improved oil cooling, so the temps stay very low.
The intake and head itself is done very well. The owner of Essex turbos ( where mine is from) said, that 440 is the best someone got from stock turbo ( itīs from evo 9 only ballbearing )
The dyno test and settings where made in Finlands most popular rally cars repair shop, by Mitsubishiīs WRC teams previous engeneer.
I could visit him again, only problem is, that he is about 600 miles from where i live
Aug 30, 2006, 06:03 AM
#14
Newbie
Thread Starter
Join Date: Aug 2006
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ang Wen Yan
What is the 60' and trap
??Improve your driving
.Any boost leak??I think your BOV leaking
.Get a Forge or 1g DSM one
.A BPU EVO can run 12.0@111MPH(Warrtalon).
??Improve your driving.Any boost leak??I think your BOV leaking.Get a Forge or 1g DSM one.A BPU EVO can run 12.0@111MPH(Warrtalon).driving? ...maybe, iīve been on the strip once. while shifting, i lift the gas pedal...maybe i should keep the boost up and try to cluch carefully with 6200 prm?
forge and 1g DSM? what r those?
and BOV....well this is one thing i should change to HKS type II
i should check the boost leaks as well...donīt know where, but iīll try
Last edited by kirju; Aug 30, 2006 at 06:11 AM.
