engine build recommendations
Jun 10, 2007, 10:32 AM
#1
Newbie
Thread Starter
Join Date: May 2007
Location: Ohio
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
engine build recommendations
I've been reading all through the forum and have decided on the following, I'm looking for any tips or recommendations and how much power you think it'll make (hey it's the newbie forum)
2.4L 4G64 Block
Eagle Rods
Ross or Weisco Pistons (8.8:1 compression)
High performance bearings
4G63 Head
Port & Polished
HKS 272s
upgraded valvetrain
currently I have a turbonetics T3/T40E ball bearing turbo, 50 trim, .63 /w stage 3 wheel
Spearco intercooler
I may have to upgrade the turbo to a GT35R, but for now I'll see if it can push 20psi.
what kind of power will I be making? and are there any recommendations for anything I missed?
right now I'm making 250whp, 270tq, with a stock 4G64 at 8.5psi untuned (really rich), runs 13.4 in a 3500lbs convertable Eclipse
I also plan on doing an AWD conversion to get the power to the ground.
2.4L 4G64 Block
Eagle Rods
Ross or Weisco Pistons (8.8:1 compression)
High performance bearings
4G63 Head
Port & Polished
HKS 272s
upgraded valvetrain
currently I have a turbonetics T3/T40E ball bearing turbo, 50 trim, .63 /w stage 3 wheel
Spearco intercooler
I may have to upgrade the turbo to a GT35R, but for now I'll see if it can push 20psi.
what kind of power will I be making? and are there any recommendations for anything I missed?
right now I'm making 250whp, 270tq, with a stock 4G64 at 8.5psi untuned (really rich), runs 13.4 in a 3500lbs convertable Eclipse
I also plan on doing an AWD conversion to get the power to the ground.
Last edited by Evo3GEclipse; Jun 10, 2007 at 10:36 AM.
Jun 10, 2007, 10:34 AM
#2
Newbie
Thread Starter
Join Date: May 2007
Location: Ohio
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
also how to the exhaust outlets compare on a 4G63 to a 4G64, because my current header was designed for a 4G64, will I need to have a new header made with larger ports or are they similar enough?, and with a ported head with the intake manifold also need ported? with a larger throttle body? I only have 2.5in intercooler piping.
