Downpipe and test pipe.
#1
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: North Brunswick
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Downpipe and test pipe.
Hey guys, I sold my buschur turbo back set up and I just purchased an APexi' N1 ExTi.
I was wondering if the Invidia downpipe and test pipe would work on this setup? Also will i have any issue fitting the downpipe on an evo IX with the acd and all? Any help or recommendation on a differnt downpipe and test pipe I should go with will be greatly appreciated.
I was wondering if the Invidia downpipe and test pipe would work on this setup? Also will i have any issue fitting the downpipe on an evo IX with the acd and all? Any help or recommendation on a differnt downpipe and test pipe I should go with will be greatly appreciated.
Last edited by underworldfury; Nov 5, 2008 at 03:41 PM.
#2
Evolved Member
iTrader: (82)
I'm assuming you got the catback portion of the exhaust and ur currently running the invidia dp and test pipe. If so, any catback exhaust should bolt up np. The fitment of the downpipe on the ix's is a big one though. I'm not sure if that exhaust will fit on the ix, should have checked before you got it.
#3
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: North Brunswick
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I have the catback portion. I need to buy a test pipe and down pipe and i was looking at the invidia. I wanted to make sure it would fit before i bought it tho. The person i bought it off of took it off his ix so i know for sure that will fit.
Trending Topics
#8
Evolving Member
Join Date: May 2007
Location: Sacramento
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
http://www.speedelement.com/index.ph...mart&Itemid=38
Invidia DPs are for 03+ Evos. So most likely it will clear the ACD, but dont quote me on that. I have the Titek 3" DP on my IX and the quality is amazing and the fitment is perfect!
#10
Evolving Member
iTrader: (1)
Join Date: Apr 2007
Location: Okinawa Japan
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
I have an Invidia O2, and DP along with a ultimate racing test pipe. They all fit fine. I will advise a few things though. The down pipe is fairly close to your oil pan, so I wrapped mine with exhaust wrap. Furthermore, the cross brace that runs under the pipe pushes on the down-pipe a little with out washers so I inserted about 3 on each side of the brace closest to the front of the car.
#11
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Sep 2006
Location: North Brunswick
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
I have an Invidia O2, and DP along with a ultimate racing test pipe. They all fit fine. I will advise a few things though. The down pipe is fairly close to your oil pan, so I wrapped mine with exhaust wrap. Furthermore, the cross brace that runs under the pipe pushes on the down-pipe a little with out washers so I inserted about 3 on each side of the brace closest to the front of the car.
Thread
Thread Starter
Forum
Replies
Last Post
cla2000
For Sale - Engine / Drivetrain / Power
3
Jul 25, 2016 04:04 AM
lancera
09+ Ralliart Engine/Turbo/Drivetrain
7
Dec 4, 2014 07:29 AM