oOoh Mm GeeE!
#1
Newbie
Thread Starter
iTrader: (11)
Join Date: Oct 2010
Location: Chicago
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
oOoh Mm GeeE!
Hello EvoM community, I have a '05 VIII and am finally in the market for new wheels/rims/"shoes"... unfortunately I am clue-less where to start.. well not completely, i know i want to run Enkei RPF1's but as far as running what size rim and what off-set or spacers I'm not so completely sure about. I'm looking to get a good looking stance. Some what aggressive but nothing too crazy. DD it. Maybe something along the lines of this...
http://www.flickr.com/photos/pixeltr...n/photostream/
again I'm kinda new to this and any bit of advice would be appreciated guys. thank you.
http://www.flickr.com/photos/pixeltr...n/photostream/
again I'm kinda new to this and any bit of advice would be appreciated guys. thank you.
Last edited by runningonE; Feb 22, 2011 at 07:31 PM.
#6
Evolving Member
iTrader: (24)
Join Date: Dec 2008
Location: Houston TX
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
255 yes but anything with a width of 9.5 with a offset of +25 or lower you may slightly rub. but i'd have to say 18x9.5 is the best size for a stock fender'd evo. i ran 18x9.5+22 before with 245/40/18 and it still rubbed in the rear. fender roll fixed it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Brand_dun
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
0
Nov 6, 2015 06:13 PM