Hi from a Sydney Evo 5!
Apr 4, 2012, 04:55 PM
#1
Newbie
Thread Starter
Join Date: Apr 2012
Location: Sydney, Australia
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hi from a Sydney Evo 5!
Hi all,
Just joined today and thought i would start a 'Members Rides' thread of my evo.
I've cut epic ramblings down to main points, to make for an easier read.
A bit about my car... Other than the E8 Enkies and the horribly ghey gold mirror tint when i first got her, i bought my V bone stock and have done all the below mods over the year and a bit I've owned her at Meek Automotive, evo specialists in Sydney Australia.
CAR:
98' Mitsubishi Evo V GSR - CP9A
COLOUR:
Satellite Silver
WORKSHOP:
www.meek.com.au
ENGINE/POWER MODS:
NGK Iridium Platinum Sparks + Leads
OEM 8MR BOV
MEEK Front Pipe
MEEK Hotside Pipe
MEEK Suction Pipes Kit
MEEK 3'' Catback Exhaust
MEEK Custom Flash Tune (22psi @ 2500rpm)
New OEM radiator
Ralliart Cap 1.3bar
Ralliart 1.5bar Actuator
HKS Super Hybrid Air Filter
Walbro GSS-342 Fuel Pump
OEM Fuel Filter
ELF Oil 10w50 Full Synthetic, (Changed every 3500k's)
Appropriate Gearbox, Transfer Case, AYC Oils (Changed every 12,000k's)
HANDLING:
Ralliart Rear Diff Bushing Kit
Ralliart Rear Support Arm Bushing Kit
OEM Strut Brace (Front + Rear)
EXTERIOR:
Wedsport TC005 (17 x 9.5 +25)
Kumho KU36's (245/45/r17)
ENDLESS SSS Pads
DBA 4000 Slotted Rotors (FRONT)
OEM 8MR Rotors (REAR)
AESTHETIC MODS:
6000k HID's (High and Low)
Rear Numberplate LED's
10% Tints
Custom Vinyl Wrap - (Rear lights, Garnish, Side Repeaters, Matte Black Window Visors, B Pillars, Front Bar Accent, Hood Scoop) - http://carbonfibrevinylwrap.net.au/g...m=43&photo=374
INTERIOR:
OEM E5 Recaros
OEM Momo Steering Wheel
OEM Mitsubishi Floor Mats
OEM Mitsubishi Visors
Ralliart Carbon Gearknob
Re-trimmed Door Cards
Autometer Boost Gauge + Holding Cup
PLANNED MODS:
Rebuilt Front Shocks + Eibach Springs (MEEK)
EBC
Carbon Fiber Wing Blade
Reconditioned the following W/ Black Metallic High Temperature Paint:
Bonnet Vent Fins
Exhaust Manifold
Spark Cover
Windscreen Wipers (Front and Rear)
Engine Hoist Hook
Oil Filler Cap
Random Rusty Metal Bits in Engine Bay
I'll post some more pics up later.
Thanks for reading
Just joined today and thought i would start a 'Members Rides' thread of my evo.
I've cut epic ramblings down to main points, to make for an easier read.
A bit about my car... Other than the E8 Enkies and the horribly ghey gold mirror tint when i first got her, i bought my V bone stock and have done all the below mods over the year and a bit I've owned her at Meek Automotive, evo specialists in Sydney Australia.
CAR:
98' Mitsubishi Evo V GSR - CP9A
COLOUR:
Satellite Silver
WORKSHOP:
www.meek.com.au
ENGINE/POWER MODS:
NGK Iridium Platinum Sparks + Leads
OEM 8MR BOV
MEEK Front Pipe
MEEK Hotside Pipe
MEEK Suction Pipes Kit
MEEK 3'' Catback Exhaust
MEEK Custom Flash Tune (22psi @ 2500rpm)
New OEM radiator
Ralliart Cap 1.3bar
Ralliart 1.5bar Actuator
HKS Super Hybrid Air Filter
Walbro GSS-342 Fuel Pump
OEM Fuel Filter
ELF Oil 10w50 Full Synthetic, (Changed every 3500k's)
Appropriate Gearbox, Transfer Case, AYC Oils (Changed every 12,000k's)
HANDLING:
Ralliart Rear Diff Bushing Kit
Ralliart Rear Support Arm Bushing Kit
OEM Strut Brace (Front + Rear)
EXTERIOR:
Wedsport TC005 (17 x 9.5 +25)
Kumho KU36's (245/45/r17)
ENDLESS SSS Pads
DBA 4000 Slotted Rotors (FRONT)
OEM 8MR Rotors (REAR)
AESTHETIC MODS:
6000k HID's (High and Low)
Rear Numberplate LED's
10% Tints
Custom Vinyl Wrap - (Rear lights, Garnish, Side Repeaters, Matte Black Window Visors, B Pillars, Front Bar Accent, Hood Scoop) - http://carbonfibrevinylwrap.net.au/g...m=43&photo=374
INTERIOR:
OEM E5 Recaros
OEM Momo Steering Wheel
OEM Mitsubishi Floor Mats
OEM Mitsubishi Visors
Ralliart Carbon Gearknob
Re-trimmed Door Cards
Autometer Boost Gauge + Holding Cup
PLANNED MODS:
Rebuilt Front Shocks + Eibach Springs (MEEK)
EBC
Carbon Fiber Wing Blade
Reconditioned the following W/ Black Metallic High Temperature Paint:
Bonnet Vent Fins
Exhaust Manifold
Spark Cover
Windscreen Wipers (Front and Rear)
Engine Hoist Hook
Oil Filler Cap
Random Rusty Metal Bits in Engine Bay
I'll post some more pics up later.
Thanks for reading
Apr 4, 2012, 11:09 PM
#4
Newbie
Thread Starter
Join Date: Apr 2012
Location: Sydney, Australia
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hey thanks heaps guys.
evolutionm was recommended by my evo mates in Sydney as you're a great bunch with some great evo knowledge.
Looking forward to contributing!
Will put more pics up!!
evolutionm was recommended by my evo mates in Sydney as you're a great bunch with some great evo knowledge.
Looking forward to contributing!
Will put more pics up!!
Thread
Thread Starter
Forum
Replies
Last Post
