Notices

*NEW TTP-Engineering Spec Groden Lightweight Aluminum Racing Rods now available 4b11t

Thread Tools
 
Search this Thread
 
Old May 29, 2009, 06:52 PM
  #1  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
*NEW TTP-Engineering Spec Groden Lightweight Aluminum Racing Rods now available 4b11t



NEW INTRO PRICING $594 SHIPPED!



TTP-Engineering
is proud to release the first batch of Lightweight Groden Racing Rods available for the 4b11t engine! In Limited Quantity!

Groden Racing rods have been used in some of the highest powered, quickest and fastest 4g63 engines in the world already. After a long wait of R&D and manufacturing time, we finally have our custom TTP-Spec Aluminum Racing Rods available for sale on a limited run.

Some advantages of high strength aluminum rods are that they are very lightweight, reducing rotating mass and are easier on rod bearings.

Here is some additional information on TTP-Spec Groden Rods.

Leading the Industry in Aluminum Rod Technology!

Concentricity is the life of connecting rods. Groden Racing Rods offer the most concentric rod-to-cap alignment available. If you want precision alignment within .0002, even after hundreds of passes, choose the best, choose Groden Rods. Top engine builders and racers from Comp to Top Fuel have proven Groden to be the best aluminum rod on the market. There isn't a better design out there. There is none better.

Testimonials:

Originally Posted by Rev-Tech Racing Engines
"I have 500 CU.IN. Top Sportsman Nitrous motors that ran the whole year on "ONE" set of groden racing rods, the rods still measured to factory spec's." "I have tested with one set on the dyno for over five months, 553 Dyno Pulls , the bearings look brand new." "I run Groden Rods in all of my motors." "IT IS A GREAT ROD" - Dennis Warner, Rev - Tech Racing
Originally Posted by Faerman Racing Engines
"I would like to express to you how I feel about your company, Groden Racing Rods." "You have in my opinion the strongest rod on the market." "The service i recieve is excellent." "I do and will recommend you , your company , and your product to anyone who inquires about racing rods." - Dennis Faerman, Faerman Racing Engines
Originally Posted by Mike Shelton Racing
"We started using your rods because of the Strength and Lightness , and we can run closer tolerances with your rods and they Last Longer." "We usually have to change rods every 40 runs, we have 63 runs on your rods, they have been checked and put back in the motor as they did not move around any." ( 731 CU.IN. ) Pro Mod
"I use your rods in all my customers motors and have never had a rod break or fail." "I have tried nearly every aluminum rod on the market And Yours is the Best ." -
Mike Shelton - S&B Racing Ent. Inc.

Last edited by TTP Engineering; Aug 5, 2009 at 02:21 PM.
Old May 29, 2009, 07:06 PM
  #2  
Evolving Member
iTrader: (1)
 
Gexxer's Avatar
 
Join Date: Feb 2008
Location: Las Vegas, Nevada
Posts: 375
Likes: 0
Received 0 Likes on 0 Posts
This was going so well till you posted that pic. Regardless, looks like a very nice piece of machined metal.
Old Jun 1, 2009, 12:10 PM
  #3  
Account Disabled
iTrader: (4)
 
Veronica@TTP's Avatar
 
Join Date: May 2008
Location: Orlando, FL
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
In stock ready to go!
Old Jun 1, 2009, 05:37 PM
  #4  
Evolved Member
iTrader: (9)
 
Hiboost's Avatar
 
Join Date: Apr 2005
Location: Rochester, NY
Posts: 3,222
Received 8 Likes on 8 Posts
If I was at that stage in the buildup I would definitely consider these. Anyone looking at GT35R power or higher should have some interest though!
Old Jun 1, 2009, 05:38 PM
  #5  
Evolved Member
iTrader: (8)
 
E VOL IX's Avatar
 
Join Date: Jan 2006
Location: Fuquay-Varina, NC
Posts: 1,194
Likes: 0
Received 0 Likes on 0 Posts
wow cute pic scott
Old Jun 1, 2009, 06:01 PM
  #6  
Evolved Member
iTrader: (4)
 
flyguycfi's Avatar
 
Join Date: Mar 2009
Location: USA
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by E VOL IX
wow cute pic scott
Scott? That's the STIG!

Someone buy these and report back!
Old Jun 1, 2009, 06:03 PM
  #7  
Evolved Member
iTrader: (18)
 
scorke's Avatar
 
Join Date: May 2003
Location: Nj
Posts: 5,192
Received 0 Likes on 0 Posts
TTP specs?

Scorke
Old Jun 2, 2009, 12:32 PM
  #8  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by palmerblock
if my memory serves me correct, u cant use these in a daily driver reliably....
oil temps for daily driving may get too hot.... if the aluminum gets too hot the rods will stretch
these are perfect for a drag race motor though...

looks nice
This is a common misconception. These rods can be a long term solution. Groden Racing rods have been used 75,000-100,000 miles or more. Many racing teams have pulled them out, mic'd and measured them, only to re-install them.

We are currently installing a set of them in our OWN daily driver for everyday use.
Old Jun 10, 2009, 10:08 AM
  #9  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Will have some measurements on the scale posted up shortly!
Old Jun 22, 2009, 06:40 AM
  #10  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Stock piston and rod weight:


Manley Ibeam Steel Rods with JE pistons:



TTP Groden Aluminum Rod with CP Piston weight:


Groden Lightweight Aluminum rods are rated for 2400hp!
Old Jun 25, 2009, 08:29 AM
  #11  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by TTP Engineering
Stock piston and rod weight:


Manley Ibeam Steel Rods with JE pistons:



TTP Groden Aluminum Rod with CP Piston weight:


Groden Lightweight Aluminum rods are rated for 2400hp!
Huge wait savings means faster revving engine with more longevity and WHP!
Old Aug 5, 2009, 02:22 PM
  #12  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts


NEW INTRO PRICING $594 SHIPPED!

Old Aug 6, 2009, 07:31 AM
  #13  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by TTP Engineering


NEW INTRO PRICING $594 SHIPPED!

All wholesale and retail orders have shipped. Tracking numbers emailed!
Old Aug 11, 2009, 09:33 AM
  #14  
Account Disabled
iTrader: (4)
 
Veronica@TTP's Avatar
 
Join Date: May 2008
Location: Orlando, FL
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
Cutting edge performance at killer pricing from TTP!

Originally Posted by TTP Engineering


NEW INTRO PRICING $594 SHIPPED!



TTP-Engineering
is proud to release the first batch of Lightweight Groden Racing Rods available for the 4b11t engine! In Limited Quantity!

Groden Racing rods have been used in some of the highest powered, quickest and fastest 4g63 engines in the world already. After a long wait of R&D and manufacturing time, we finally have our custom TTP-Spec Aluminum Racing Rods available for sale on a limited run.

Some advantages of high strength aluminum rods are that they are very lightweight, reducing rotating mass and are easier on rod bearings.

Here is some additional information on TTP-Spec Groden Rods.

Leading the Industry in Aluminum Rod Technology!

Concentricity is the life of connecting rods. Groden Racing Rods offer the most concentric rod-to-cap alignment available. If you want precision alignment within .0002, even after hundreds of passes, choose the best, choose Groden Rods. Top engine builders and racers from Comp to Top Fuel have proven Groden to be the best aluminum rod on the market. There isn't a better design out there. There is none better.

Testimonials:







Old Aug 13, 2009, 08:42 AM
  #15  
Account Disabled
Thread Starter
iTrader: (465)
 
TTP Engineering's Avatar
 
Join Date: May 2005
Location: Central FL
Posts: 8,824
Likes: 0
Received 2 Likes on 2 Posts
Sale pricing applies for a short time. Better hurry!

Originally Posted by TTP Engineering


NEW INTRO PRICING $594 SHIPPED!



TTP-Engineering
is proud to release the first batch of Lightweight Groden Racing Rods available for the 4b11t engine! In Limited Quantity!

Groden Racing rods have been used in some of the highest powered, quickest and fastest 4g63 engines in the world already. After a long wait of R&D and manufacturing time, we finally have our custom TTP-Spec Aluminum Racing Rods available for sale on a limited run.

Some advantages of high strength aluminum rods are that they are very lightweight, reducing rotating mass and are easier on rod bearings.

Here is some additional information on TTP-Spec Groden Rods.

Leading the Industry in Aluminum Rod Technology!

Concentricity is the life of connecting rods. Groden Racing Rods offer the most concentric rod-to-cap alignment available. If you want precision alignment within .0002, even after hundreds of passes, choose the best, choose Groden Rods. Top engine builders and racers from Comp to Top Fuel have proven Groden to be the best aluminum rod on the market. There isn't a better design out there. There is none better.

Testimonials:









Quick Reply: *NEW TTP-Engineering Spec Groden Lightweight Aluminum Racing Rods now available 4b11t



All times are GMT -7. The time now is 04:08 PM.