Boomba Racing Evo X 75mm Throttle Body
#18
Former Sponsor
Thread Starter
iTrader: (6)
Join Date: Dec 2004
Location: Chicago
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
I found this floating around in another thread from another forum, hope it helps.
First we tested a stock throttle body to establish our baseline. Next we installed a Boomba 64 mm throttle body (which is stock TB bored to 64 mm). We noticed a peak torque gain of 5ft-lb and 2 hp. Gains were consistant all the way from midrange up to red line.
After that it was time to try Boomba Racing's 75 mm TB. We had a peak torque gain of 6 ft-lb and 15 hp. Gains were significantly higher from midrange to red line.
One more graph showing Boomba 75mm TB with our Hybrid Manifold vs Stock TB and stock manifold.
26 Hp more and HUGE improvements from midrange to the red line.
First we tested a stock throttle body to establish our baseline. Next we installed a Boomba 64 mm throttle body (which is stock TB bored to 64 mm). We noticed a peak torque gain of 5ft-lb and 2 hp. Gains were consistant all the way from midrange up to red line.
After that it was time to try Boomba Racing's 75 mm TB. We had a peak torque gain of 6 ft-lb and 15 hp. Gains were significantly higher from midrange to red line.
One more graph showing Boomba 75mm TB with our Hybrid Manifold vs Stock TB and stock manifold.
26 Hp more and HUGE improvements from midrange to the red line.