ETS + 4WS + 110k mile EVO = FTMFW
#1
ETS + 4WS + 110k mile EVO = FTMFW
I made a thread a while ago in Service, and Tuning forum plugging my man Tamer for the tune. I forgot to move it over here. ETS parts and 4WS
Tune FTMFW
So Ok the rundown.
03 VIII, 110k miles Stock Block, No porting on the head, Stock Tranny, Stock TC, Stock ignition, 93 octane pump gas only. 25-26 psi
ETS PT61mm BB Super Value kit w/ Tial 44mm WG
BC 272's (Kelfords coming soon to an EVO near you)![lol](https://www.evolutionm.net/forums/images/smilies/lol.gif)
BC springs and TI retainers
ARP Headstuds
ETS 3.5in FMIC
ETS Intake
Injen 3in TBE
Hondata IM Spacer
ACT HDSS w/ Grouppe S 10.5lb Flywheel
NGK BR8ES
Here's the DLL doesnt mean too much but. Seeing DLL graphs pre turbo and post makes me smile. I think on the IX turbo the car was like 330.
![](http://img03.picoodle.com/img/img03/3/12/16/f_lukem_644d136.jpg)
Big *** thanks to ETS for kick *** parts and service
Adam (evo8dad) for your help on the installs of the clutch, cams, springs, retainers, and studs
EVODAN2004 for always being around to bounce ideas off of and using your compressor and tester for leak test while I've been in this apt and couldn't get to PA![lol](https://www.evolutionm.net/forums/images/smilies/lol.gif)
Motor Build and Race gas tuning hopefully pre next race season
Tune FTMFW
So Ok the rundown.
03 VIII, 110k miles Stock Block, No porting on the head, Stock Tranny, Stock TC, Stock ignition, 93 octane pump gas only. 25-26 psi
ETS PT61mm BB Super Value kit w/ Tial 44mm WG
BC 272's (Kelfords coming soon to an EVO near you)
![lol](https://www.evolutionm.net/forums/images/smilies/lol.gif)
BC springs and TI retainers
ARP Headstuds
ETS 3.5in FMIC
ETS Intake
Injen 3in TBE
Hondata IM Spacer
ACT HDSS w/ Grouppe S 10.5lb Flywheel
NGK BR8ES
Here's the DLL doesnt mean too much but. Seeing DLL graphs pre turbo and post makes me smile. I think on the IX turbo the car was like 330.
![](http://img03.picoodle.com/img/img03/3/12/16/f_lukem_644d136.jpg)
Big *** thanks to ETS for kick *** parts and service
Adam (evo8dad) for your help on the installs of the clutch, cams, springs, retainers, and studs
EVODAN2004 for always being around to bounce ideas off of and using your compressor and tester for leak test while I've been in this apt and couldn't get to PA
![lol](https://www.evolutionm.net/forums/images/smilies/lol.gif)
Motor Build and Race gas tuning hopefully pre next race season
![Thumbs Up](https://www.evolutionm.net/forums/images/smilies/smilie_thumbsup.gif)
#7
Thanks guys. ![Beer](https://www.evolutionm.net/forums/images/smilies/beer05.gif)
![Big Grin](https://www.evolutionm.net/forums/images/smilies/biggrin.gif)
There has got to be an VIII on here with more milage than mine. I must say I do maintain the drivetrain very well as far as fluid changes and stuff go.
Next step is 4 new coilovers, Whiteline kit, Inner Tie Rod ends, my 2nd set of brake pads (ever), and SS Lines
![Beer](https://www.evolutionm.net/forums/images/smilies/beer05.gif)
![Big Grin](https://www.evolutionm.net/forums/images/smilies/biggrin.gif)
There has got to be an VIII on here with more milage than mine. I must say I do maintain the drivetrain very well as far as fluid changes and stuff go.
Next step is 4 new coilovers, Whiteline kit, Inner Tie Rod ends, my 2nd set of brake pads (ever), and SS Lines
Trending Topics
#8
Evolved Member
iTrader: (75)
Join Date: Jul 2007
Location: NorCal
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
There is a guy here in norcal who has almost 130k miles on his Evo8! Not sure if he is on these forums. He is actually just now starting to mod it other than intake and exhaust. I am pretty sure he is doing cams, a 9 turbo, intercooler, and I believe he just put an ACT clutch in...all on stock bottom end.
Thread
Thread Starter
Forum
Replies
Last Post
turbodav
Vendor Service / Parts / Tuning Review
15
May 28, 2009 12:09 PM
deepcover6
For Sale - Cars For Sale
1
Mar 1, 2008 05:44 PM