Engine Overboost...getting pissed!!!
#17
EvoM Guru
iTrader: (5)
Originally Posted by Nez136
So even with a CEL on i won't loose HP?
If you want the car to pass an OBD-II inspection, turn the boost down to 16psi or less, use the passthrough or map1 with a very lame map with ECU Passthrough timing and drive it for a day before the inspection..
cell's like overboost, fuel trim lean (thats an open loop issue not closed loop), O2 sensor rich/lean or slow.. etc.. just ignore them for the most part and reset the ECU.. you "could" get a reflash to alter the MAF curve and ignore the boost cut settings, but your much better off not doing it.
Thread
Thread Starter
Forum
Replies
Last Post
PearlWhiteX
Evo X Engine / Turbo / Drivetrain
7
May 9, 2016 08:05 PM
twinspoolin94
Evo X Engine Management / Tuning Forums
2
Oct 15, 2015 05:28 AM
TS Dork
Evo General
7
Nov 28, 2013 07:34 PM