where do i plug in my tactrix cable?
Jun 21, 2008, 09:14 AM
#5
Evolving Member
Join Date: Apr 2004
Location: Western North Carolina
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
I have the same year US GSR and the same cable, minus the two, unattached plugs.
I have logged and reflashed my car with just the cable; big black plug goes in the OBD port to the right of the steering wheel under the dash, white plug goes into the sock to the left of that (if you are going to flash; not needed for logging).
I'm guessing the other two plugs are for another application (car). It is possible they are needed for AYC or some other such device the US cars don't have.
The USB end goes into your laptop.
I have logged and reflashed my car with just the cable; big black plug goes in the OBD port to the right of the steering wheel under the dash, white plug goes into the sock to the left of that (if you are going to flash; not needed for logging).
I'm guessing the other two plugs are for another application (car). It is possible they are needed for AYC or some other such device the US cars don't have.
The USB end goes into your laptop.
Jun 21, 2008, 09:15 AM
#6
Evolved Member
iTrader: (12)
Join Date: Sep 2006
Location: RENO
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
It plugs into your obd.If you look under the steering column off to the right you will see your OBD plug in and that's where it goes.You should'nt need the other two.
Trending Topics
I had a terrible cold when I made that video 
Thread
Thread Starter
Forum
Replies
Last Post
