audiofan

iTrader: (6)

I use coolant aditives such as VP racing cool down or water wetter, and they do a good job, keeps temps lower

Kevin.

iTrader: (7)

I used OEM Mitsu blue coolant in the fall. It's already prediluted. Aftermarket coolant-wise you could run this:

sshumaker

Hello I hope you are well! Good news the stock fan is still going strong! I am looking at the SPAL fans now and they have two options "pusher" and "puller" would I get 1 of each? I am hoping this helps. After some more research on hard pulls the car is running at approx 95-100c or 200-212F and goes back to normal running temp 90c or below / 194f.

sshumaker

I was looking into the water wetter. I live in NJ so summers can be humid and hot I will add this when I get the fluid flushed and see if it makes a difference. Thank you for getting back to me.

sshumaker

Thank you for letting me know this would work as well. I got the OEM Mitsu off of STM and ordered and extra gallon to keep on hand in the event I need it.