03 lancer es Evo 8 build
#182
ok so im back from turbo trix. got couplers but gotta make sure they work. we just searched around the shop for some!! ughh i hope my oil feed line comes today. havnt gotten my good pics up yet, computer is in the workshop so its hard to use it with dirty hands.
ok so i got a bunch of letter emblems for cars and need to sell them. im thinking u know we all have our names we make on evom, why not put them on our cars and personalize them more!!!
give me some feedback on that or other options, ask ur moms lol.
ok so i got a bunch of letter emblems for cars and need to sell them. im thinking u know we all have our names we make on evom, why not put them on our cars and personalize them more!!!
give me some feedback on that or other options, ask ur moms lol.
#184
Evolved Member
iTrader: (15)
just go find some 0 gauge wire.. (home depot) and go buy 2 new battery terminals (autozone) and go buy a marine style battery box from napa..
u should spend like.. 30 bucks.. if that..
o.. and go buy some 1 foot long all threads, and some bolts/washers.. and bolt it in the trunk..
u should spend like.. 30 bucks.. if that..
o.. and go buy some 1 foot long all threads, and some bolts/washers.. and bolt it in the trunk..
#185
oh im actually building a bracket to mount it where the evo one sits.
so today i set up the feed line, ( i got my lines ) put the new couplers on, tapped the oil pan which was extremely easy by the way. put the oil pan back on. bought 90 degree 5/8 hose for the oil return and a little breather filter. cant wait to work on it tomorrow night
so today i set up the feed line, ( i got my lines ) put the new couplers on, tapped the oil pan which was extremely easy by the way. put the oil pan back on. bought 90 degree 5/8 hose for the oil return and a little breather filter. cant wait to work on it tomorrow night
#186
well just about everything is done now, got the fan done and fuel pump....just the next thing is the gauges and vacuum lines and mounting the battery, fpr, and idk something else lol...gonna get powder coating done for my pipes and valve cover on thursday. after this im making a list of every little part that u would need to do this build and someone better get right on it since there will be a complete list of everything! i expect everyone to order the manifold from speedcorps and getter done.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
will be working on it again on friday night or something, got school till 9 pm tomorrow night and going to get stuff on thursday.
cya guys then
will be working on it again on friday night or something, got school till 9 pm tomorrow night and going to get stuff on thursday.
cya guys then
Last edited by zulu989; Apr 29, 2009 at 06:10 AM.
#187
Evolving Member
iTrader: (42)
Join Date: Apr 2005
Location: Vacaville, CA
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with the build bro! I've helped you as much as I could. I'll try and get an internet connection in Korea and figure out the time difference as well haha. I'll check in on the progress sometime next week hopefully.
Keep it up man! Starting to look good!
Keep it up man! Starting to look good!
#189
http://www.facebook.com/photo.php?pi...f&id=199802623
Almost Complete
http://www.facebook.com/photo.php?pi...9&id=199802623
FAN MOUNTED IN FRONT
http://www.facebook.com/photo.php?pi...6&id=199802623
new walbro 255 on right side
http://www.facebook.com/photo.php?pi...8&id=199802623
sexay shot of the manifold
1. http://www.facebook.com/photo.php?pi...d&id=199802623
oil pan...use 5/8 pipe fitting with 1/2 npt tap and and 90 degree 5/8 hose from auto zone, cut the coils off the turbo oil return and clamp on hose. dril to the right of the x to not be in the way of the bolt.
2. http://www.facebook.com/photo.php?pi...e&id=199802623
Coils were not cut yet
3. http://www.facebook.com/photo.php?pi...1&id=199802623
pipe is on now
http://www.facebook.com/photo.php?pi...8&id=199802623
where the fuel pump sits, just take back seat off
http://www.facebook.com/photo.php?pi...d&id=199802623
this is where i mounted the fan controller
http://www.facebook.com/photo.php?pi...1&id=199802623
lilazn helping me out lol
http://www.facebook.com/photo.php?pi...4&id=199802623
very helpful
http://www.facebook.com/photo.php?pi...6&id=199802623
mounted intercooler, 2 bolts direct fit.
http://www.facebook.com/photo.php?pi...e&id=199802623
passenger side, oil feed line on top of oil filter ( which is removed now)
http://www.facebook.com/photo.php?pi...1&id=199802623
oil feed line attached. 4 feet steel braided with -4an fittings, 1/2 inch 90 to a -6an ??? to -4an
http://www.facebook.com/photo.php?pi...8&id=199802623
would u look at that, a direct fit!
http://www.facebook.com/photo.php?pi...1&id=199802623
Radiator fan mounting kit, ( autozone ) and perrin shorty attenae from www.speedcorps.com
Almost Complete
http://www.facebook.com/photo.php?pi...9&id=199802623
FAN MOUNTED IN FRONT
http://www.facebook.com/photo.php?pi...6&id=199802623
new walbro 255 on right side
http://www.facebook.com/photo.php?pi...8&id=199802623
sexay shot of the manifold
1. http://www.facebook.com/photo.php?pi...d&id=199802623
oil pan...use 5/8 pipe fitting with 1/2 npt tap and and 90 degree 5/8 hose from auto zone, cut the coils off the turbo oil return and clamp on hose. dril to the right of the x to not be in the way of the bolt.
2. http://www.facebook.com/photo.php?pi...e&id=199802623
Coils were not cut yet
3. http://www.facebook.com/photo.php?pi...1&id=199802623
pipe is on now
http://www.facebook.com/photo.php?pi...8&id=199802623
where the fuel pump sits, just take back seat off
http://www.facebook.com/photo.php?pi...d&id=199802623
this is where i mounted the fan controller
http://www.facebook.com/photo.php?pi...1&id=199802623
lilazn helping me out lol
http://www.facebook.com/photo.php?pi...4&id=199802623
very helpful
http://www.facebook.com/photo.php?pi...6&id=199802623
mounted intercooler, 2 bolts direct fit.
http://www.facebook.com/photo.php?pi...e&id=199802623
passenger side, oil feed line on top of oil filter ( which is removed now)
http://www.facebook.com/photo.php?pi...1&id=199802623
oil feed line attached. 4 feet steel braided with -4an fittings, 1/2 inch 90 to a -6an ??? to -4an
http://www.facebook.com/photo.php?pi...8&id=199802623
would u look at that, a direct fit!
http://www.facebook.com/photo.php?pi...1&id=199802623
Radiator fan mounting kit, ( autozone ) and perrin shorty attenae from www.speedcorps.com
Last edited by zulu989; Apr 30, 2009 at 06:43 AM.
#193
Newbie
iTrader: (1)
Join Date: Oct 2008
Location: Phoenix, AZ
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
... after this im making a list of every little part that u would need to do this build and someone better get right on it since there will be a complete list of everything! i expect everyone to order the manifold from speedcorps and getter done.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
...
...
#195
1. http://www.facebook.com/photo.php?pi...3&id=199802623
Fuel pump cover bracket...need to cut out the shape of the rubber piece, ull see when u do it that it wont clip right so u have to modify it but not too much bc u want to it to still hold the filter and rubber piece on to the pump.
2. http://www.facebook.com/photo.php?pi...3&id=199802623
http://www.facebook.com/photo.php?pi...d&id=199802623
these are FREE replacement gaskits from forge for the adjustable wastegate. i got them in 2 days so that company is good!!!
http://www.facebook.com/photo.php?pi...e&id=199802623
me using a plasma cutter to cut the bracket for the battery
1. http://www.facebook.com/photo.php?pi...8&id=199802623
where the battery sits now
2. http://www.facebook.com/photo.php?pi...9&id=199802623
Fuel pump cover bracket...need to cut out the shape of the rubber piece, ull see when u do it that it wont clip right so u have to modify it but not too much bc u want to it to still hold the filter and rubber piece on to the pump.
2. http://www.facebook.com/photo.php?pi...3&id=199802623
http://www.facebook.com/photo.php?pi...d&id=199802623
these are FREE replacement gaskits from forge for the adjustable wastegate. i got them in 2 days so that company is good!!!
http://www.facebook.com/photo.php?pi...e&id=199802623
me using a plasma cutter to cut the bracket for the battery
1. http://www.facebook.com/photo.php?pi...8&id=199802623
where the battery sits now
2. http://www.facebook.com/photo.php?pi...9&id=199802623