List of Turboed Lancers
#137
Evolving Member
iTrader: (2)
Join Date: Feb 2008
Location: Indiana
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
I just got mine back from AMS a few weeks ago. It is the RRM 16G manifold and turbo on an AMS built motor, (9.0:1 Wesico pistons, K1 rods ARP bolts and studs),
with custom AMS intercooler piping, speed density setup and an AEM EMS. 235HP and 258 Torque. My next step is a ported and built head and RPW camshaft.
with custom AMS intercooler piping, speed density setup and an AEM EMS. 235HP and 258 Torque. My next step is a ported and built head and RPW camshaft.
#138
Evolved Member
iTrader: (3)
Join Date: Jun 2010
Location: Boston MA
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
I just got mine back from AMS a few weeks ago. It is the RRM 16G manifold and turbo on an AMS built motor, (9.0:1 Wesico pistons, K1 rods ARP bolts and studs),
with custom AMS intercooler piping, speed density setup and an AEM EMS. 235HP and 258 Torque. My next step is a ported and built head and RPW camshaft.
with custom AMS intercooler piping, speed density setup and an AEM EMS. 235HP and 258 Torque. My next step is a ported and built head and RPW camshaft.
#139
Evolved Member
iTrader: (21)
#140
Evolved Member
iTrader: (3)
Join Date: Jun 2010
Location: Boston MA
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
ask and you shall receive https://www.evolutionm.net/forums/la...-camshaft.html
#142
Evolving Member
i would not suggest running the 1/4 at 16psi and stock internals.. stick to 1/8th e85 and a decomp gasket makes detonation alot less likely, but more then likely a rod will go.. u would just join then 'how many motors can you pop' in a year club. and get some slicks if u wanna get traction.. <-- not kidding either
blackopp post up some current pics. i love checken out other rides that have been built right. im waiting to see someone keep up with my 12.8pass with 24.5x9.15 slicks. (13.4 is still my fastest on street tires) and my motor is now gone now as of friday!(stretched a rod and bent a valve and blew up a plug friday night on a 13.1 pass with the slicks on, but i got a new motor that were finishing building these next few weeks for my new setup were doing, its time to up the boost!)
ill be at 20psi on e85 next time i roll out! (gotta beak in the motor first at 1bar/15psi, then retune at 20psi)
blackopp post up some current pics. i love checken out other rides that have been built right. im waiting to see someone keep up with my 12.8pass with 24.5x9.15 slicks. (13.4 is still my fastest on street tires) and my motor is now gone now as of friday!(stretched a rod and bent a valve and blew up a plug friday night on a 13.1 pass with the slicks on, but i got a new motor that were finishing building these next few weeks for my new setup were doing, its time to up the boost!)
ill be at 20psi on e85 next time i roll out! (gotta beak in the motor first at 1bar/15psi, then retune at 20psi)
Thread
Thread Starter
Forum
Replies
Last Post
Freddy302
Evo Engine / Turbo / Drivetrain
66
Dec 25, 2016 09:49 PM
marcouxa1
Lancer Aftermarket Forced Induction Tech
11
Aug 5, 2016 12:47 PM
03lances
Lancer Aftermarket Forced Induction Tech
1861
Mar 14, 2016 10:30 PM
Freddy302
Evo Dyno Tuning / Results
11
Aug 6, 2013 06:30 AM