question about an aftermarket system
#1
question about an aftermarket system
hey guys i have the lancer gts and its going to my bday so im gonna go get a system.. im just thinking of one 12" rockford fosgate P2D412 its a dual-voice coil 4 ohm sub... now my question is what else would i need... i know i need a box and a sub and all that but i've been reading that b/c our electric power is weak we need a capacitor? what does a capacitor do and could anyone give me some suggestions for an amp that would match my sub?? thnx
#2
What kind of music do you enjoy listening to in the car? that could help determine whether a 10" or 12" sub & what type of enclosure (sealed, ported, bandpass) is more suited to your style.
You want to match the amp to the sub, meaning to have a similar RMS rating for both the sub and amp. Using the model you listed, 250 RMS for the sub...match it with a 250/300RMS amp.
Might I suggest a Mono block D-class amp; this is an example of what I mentioned earlier... http://www.rockfordfosgate.com/produ...n_US&p_status=
It's got 300RMS with a 2 ohm load.
No need for a cap/batt, just feed it with a minimum 4-ga wire kit. And depending on whether you're using the factory HU, you might need in-line adapters to use the RCA inputs for the amp.
Any other questions? let us know.
You want to match the amp to the sub, meaning to have a similar RMS rating for both the sub and amp. Using the model you listed, 250 RMS for the sub...match it with a 250/300RMS amp.
Might I suggest a Mono block D-class amp; this is an example of what I mentioned earlier... http://www.rockfordfosgate.com/produ...n_US&p_status=
It's got 300RMS with a 2 ohm load.
No need for a cap/batt, just feed it with a minimum 4-ga wire kit. And depending on whether you're using the factory HU, you might need in-line adapters to use the RCA inputs for the amp.
Any other questions? let us know.
#3
yea SLVROZ pretty much covered it
personally im a big fan of memphis amps they make great amps but its really up to u if u want to match the rockford fosgate ..in any case u will definatley not need a cap fer that...in many cases caps can actually do more harm then good..im not gunna go into explaining it unless some1 rly wants me to..
personally im a big fan of memphis amps they make great amps but its really up to u if u want to match the rockford fosgate ..in any case u will definatley not need a cap fer that...in many cases caps can actually do more harm then good..im not gunna go into explaining it unless some1 rly wants me to..
#6
What kind of music do you enjoy listening to in the car? that could help determine whether a 10" or 12" sub & what type of enclosure (sealed, ported, bandpass) is more suited to your style.
You want to match the amp to the sub, meaning to have a similar RMS rating for both the sub and amp. Using the model you listed, 250 RMS for the sub...match it with a 250/300RMS amp.
Might I suggest a Mono block D-class amp; this is an example of what I mentioned earlier... http://www.rockfordfosgate.com/produ...n_US&p_status=
It's got 300RMS with a 2 ohm load.
No need for a cap/batt, just feed it with a minimum 4-ga wire kit. And depending on whether you're using the factory HU, you might need in-line adapters to use the RCA inputs for the amp.
Any other questions? let us know.
You want to match the amp to the sub, meaning to have a similar RMS rating for both the sub and amp. Using the model you listed, 250 RMS for the sub...match it with a 250/300RMS amp.
Might I suggest a Mono block D-class amp; this is an example of what I mentioned earlier... http://www.rockfordfosgate.com/produ...n_US&p_status=
It's got 300RMS with a 2 ohm load.
No need for a cap/batt, just feed it with a minimum 4-ga wire kit. And depending on whether you're using the factory HU, you might need in-line adapters to use the RCA inputs for the amp.
Any other questions? let us know.
Trending Topics
#8
Hey Krnkimchi702, I am not sure how set on the P2 you are, but I have a 12" Alpine Type R in an Alpine ported enclosure I could sell you. The sub is in brand new condition, it was only used for about 2 months or so before I bought my Kickers. I saw that you are in the Tucson area, I am in Phoenix but if you wanted it I could drive and meet you somewhere in the middle. Send me a PM if you're interested... it's just sitting in my garage being bored, needing a good car to sit in.
#9
yea SLVROZ pretty much covered it
personally im a big fan of memphis amps they make great amps but its really up to u if u want to match the rockford fosgate ..in any case u will definatley not need a cap fer that...in many cases caps can actually do more harm then good..im not gunna go into explaining it unless some1 rly wants me to..
personally im a big fan of memphis amps they make great amps but its really up to u if u want to match the rockford fosgate ..in any case u will definatley not need a cap fer that...in many cases caps can actually do more harm then good..im not gunna go into explaining it unless some1 rly wants me to..
#10
omg empire... i just got 2 12's in my car. i wish i would've seen ur post sooner...... but im loving my 12's... kenwood.. i already got a kendwood nav in my car so i figure i would go kenwood all around.. but dang i wish i could've seen ur post sooner...
#12
yeah imma have pics up for tomarrow.. my g/f actually saw this post on evolution with a guy's license plate frame saying " when i grow up i want to be an evo x" and she got me that so im going to put that on and take pictures of the subs... oh btw if anyone knows who's car that has that frame... i wanna give that guy props..
#13
yeah imma have pics up for tomarrow.. my g/f actually saw this post on evolution with a guy's license plate frame saying " when i grow up i want to be an evo x" and she got me that so im going to put that on and take pictures of the subs... oh btw if anyone knows who's car that has that frame... i wanna give that guy props..
#14
here are some pics of the subs....
the guy who installed it tried to hide the wires so it looked like the amp was "floating"
and finally the baby...
the license plate frame looks purple but its black..it looked like it was purple b/c mad light was hitting it... damn u arizona sun!!!!
i already have dynamat but should put more dynamat over the exposed metal piece i drew an arrow on???
the guy who installed it tried to hide the wires so it looked like the amp was "floating"
and finally the baby...
the license plate frame looks purple but its black..it looked like it was purple b/c mad light was hitting it... damn u arizona sun!!!!
i already have dynamat but should put more dynamat over the exposed metal piece i drew an arrow on???
Last edited by krnkimchi702; Nov 6, 2007 at 04:11 PM.