RRM PB v2 INSTALL HELP!
Aug 18, 2007, 10:59 AM
#1
Newbie
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Parkesburg, PA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
RRM PB v2 INSTALL HELP!
Well I bought a Piggy off of ebay.. (bad Idea) Anyway, the guy said all instructions/installation manuals were included. He lied. Now i'm stuck with a piggy and no instructions. I should have paid the extra $100 and bought it from RRM so that it came with instructions, but hindsight is 20/20.
I searched and keep finding Dangerous dan's Ralliart install, and an install for an automatic trans. Nothing for manual oz/es. Help anyone? I can get a pin diagram. I just need the installation instructions.
I'd feel bad calling RRM for help considering they didn't get any proceeds from this, but I guess that's my last resort.
Thanks.
Don't flame me.
Chris
I searched and keep finding Dangerous dan's Ralliart install, and an install for an automatic trans. Nothing for manual oz/es. Help anyone? I can get a pin diagram. I just need the installation instructions.
I'd feel bad calling RRM for help considering they didn't get any proceeds from this, but I guess that's my last resort.
Thanks.
Don't flame me.
Chris
Aug 18, 2007, 11:39 AM
#3
Evolving Member
Yeah they aren't gonna care. Plus its not like you have to explain why you dont have the instructions.
I didn't need explain to greddy why my ultimate jumpers were all fubar'ed from default and I didn't know how to reset it for the 4g93, i did explain but the guy was still really helpful. Im sure rrm would do the same.
I didn't need explain to greddy why my ultimate jumpers were all fubar'ed from default and I didn't know how to reset it for the 4g93, i did explain but the guy was still really helpful. Im sure rrm would do the same.
Aug 18, 2007, 11:47 AM
#4
Newbie
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Parkesburg, PA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Yeah they aren't gonna care. Plus its not like you have to explain why you dont have the instructions.
I didn't need explain to greddy why my ultimate jumpers were all fubar'ed from default and I didn't know how to reset it for the 4g93, i did explain but the guy was still really helpful. Im sure rrm would do the same.
I didn't need explain to greddy why my ultimate jumpers were all fubar'ed from default and I didn't know how to reset it for the 4g93, i did explain but the guy was still really helpful. Im sure rrm would do the same.
lol. Yeah but RRM is a much smaller company than Greddy. If I would do it again, i'd just buy straight from RRM.. I hope my honesty will pay off.
Trending Topics
Aug 22, 2007, 11:32 AM
#9
Newbie
Join Date: Nov 2006
Location: bronx, new yorkq
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
BTw anyon elses piggy bumps rpms....mines cycles....it raises itself from 1000 rpm - 1400 in 2 seconds then goes back down to 1000 and then back up to 1400 and back down constantly
Aug 22, 2007, 11:49 AM
#10
Newbie
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Location: Parkesburg, PA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I installed mine. It has a vaugely rough idle, that's it. Nothing for me to worry about.. Are you saying that your idle constantly goes from 1000 rpm's to 1400?
Thread
Thread Starter
Forum
Replies
Last Post
Lancer8806
Lancer Engine Management / Tuning Forums
11
Jan 5, 2008 04:39 PM
chinto
Lancer How To Requests / Questions / Tips
2
Jun 18, 2005 10:27 AM
