My Custom Modified Stock Bumper for Larger IC (*No 56k*)
#1
My Custom Modified Stock Bumper for Larger IC (*No 56k*)
I had this mod done a couple of months ago, but haven't had a chance to post about it. Finally, for it's Internet debut, I present my custom modified stock bumper
I wanted a front bumper that allowed more of my intercooler to be exposed increasing the cooling effeciency. I also wanted to retain a stockish look. I have a good friend who works at a body shop and we figured out a way we could modify the stock bumper to achieve my desired look. This is the result and I think it turned out great. So, without further ado, here is my custom modified stock bumper
A big thanks to Mike for all the time you put into this for me
EDIT: Full Lancer Pics Added (07/07/07)
BEFORE
AFTER
I wanted a front bumper that allowed more of my intercooler to be exposed increasing the cooling effeciency. I also wanted to retain a stockish look. I have a good friend who works at a body shop and we figured out a way we could modify the stock bumper to achieve my desired look. This is the result and I think it turned out great. So, without further ado, here is my custom modified stock bumper
A big thanks to Mike for all the time you put into this for me
EDIT: Full Lancer Pics Added (07/07/07)
BEFORE
AFTER
Last edited by Z_Lancer_Man; Jul 7, 2007 at 08:12 PM.
Trending Topics
#11
Thanks everyone for the compliments. Just to eliminate any further debate, it is a stock EVO intercooler. If Mitsu engineers decided that for the 270+ HP Evolution should come with that intercooler from the factory, then it should be more than sufficient for my 220+ HP Lancer You should have seen what it looked like with the intercooler RRM included in the T28 IC kit!