NEX Full Coilovers?
Sep 20, 2005, 09:38 AM
#331
Originally Posted by Shingen
I would suggest you just use a breaker bar to break those bolts and then the air gun to just zip them off. There are also two zip ties used to hold the brake lines bugt I couldn't figure out where they are suppose to attach to. Also, when you are dialing in the setting make sure you measure the height before and after. Good luck bro and have fun on the twisties. 
Fox
PS- nearly 1300 miles and they are doing great. I love this setup.
Fox
PS- nearly 1300 miles and they are doing great. I love this setup.
Ya i will problaby have 1300 on mine by the end of the weekend.
Sep 20, 2005, 09:44 AM
#332
I managed to get the zip ties on. My father-in-law is working on a aluminum brackets for the fronts so you can bolt the brake line down like you do with the factory setup. If I like what he makes I will see if he can make some more. I will talk to him when he gets back from his mini-vacation on Thursday.
Sep 20, 2005, 09:46 AM
#333
Originally Posted by Kurt
I managed to get the zip ties on. My father-in-law is working on a aluminum brackets for the fronts so you can bolt the brake line down like you do with the factory setup. If I like what he makes I will see if he can make some more. I will talk to him when he gets back from his mini-vacation on Thursday.
**note to self** bring some materials home to fab up brackets.
Sep 22, 2005, 06:41 AM
#335
I thought I posted that. About $680 CDN but my worked payed for shipping.
I installed them, and am quite happy. I have to make some minor adjustments and get to an alignment shop still. The car is 1" lower then stock, which is as high as the coilovers would allow (safely), and handles great. The ride is stiff and rough but definatly tollerable. The true test will be on October 1st. When I go to shannonville speedway for lapping day.
-Danno
I installed them, and am quite happy. I have to make some minor adjustments and get to an alignment shop still. The car is 1" lower then stock, which is as high as the coilovers would allow (safely), and handles great. The ride is stiff and rough but definatly tollerable. The true test will be on October 1st. When I go to shannonville speedway for lapping day.
-Danno
Dec 28, 2005, 10:14 AM
#336
Evolving Member
iTrader: (6)
Join Date: May 2004
Location: California
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
there is a video in my signature of these coilovers in action.
I have no tower bars or anything. no body roll... :-) I sold these for the commute.. 120 mile round trip to the SF bay area... yeah...unheard of on aftermarkets.
The car was lowered front and back just level to the fender.
- Andy
I have no tower bars or anything. no body roll... :-) I sold these for the commute.. 120 mile round trip to the SF bay area... yeah...unheard of on aftermarkets.
The car was lowered front and back just level to the fender.
- Andy
Jan 9, 2006, 10:38 AM
#341
Newbie
iTrader: (1)
Join Date: Apr 2002
Location: SA, TX
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Rennen Motors is no longer registered on Ebay and their website gives a "Cannot find server" message. I did find these site that sell them: http://www.elementmotorsport.com/pro...oductID=167877
https://www.groupbuycenter.com/Product.aspx?id=79866
More expensive though.
https://www.groupbuycenter.com/Product.aspx?id=79866
More expensive though.
Thread
Thread Starter
Forum
Replies
Last Post
jayevo23
Evo X Tires / Wheels / Brakes / Suspension
3
Apr 19, 2017 12:09 PM
LoveBoost
Evo Tires / Wheels / Brakes / Suspension
8
Dec 3, 2007 08:48 AM
whitelancerGTS
Lancer Tires, Wheels, Brakes & Suspension - Sponsored by The Tire Rack
24
Aug 6, 2007 08:37 PM
