villero1834

iTrader: (1)

ok so i have a lancer 08 , non evo , but im posting here cuz the lancer treads are not really popular in this forum , so as u can imagine , we lancer guys try to get the best out of our cars so to my riding on 18 is a waste because of th big loss of power , so im going back to 16 (i have an es ) and checkin around i found this sportmaxx 002 and i ll like to see if it will fit on my car , im trying to get the 16 x8 with 3.5 lip , so d i need any special thing like wich offset or something else , please reply asap , im really impacient when it comes to buy stuff for my mitsu thanks

vd

iTrader: (3)

if you include all the information regarding the rim (width, ET, PCD, holes, etc) it would significantly increase the probability you get the right answer

Smike

iTrader: (8)

Moved back here - only way to make a forum area popular is to use it.

Here:
http://www.rimsntires.com/specs.jsp

03lances

iTrader: (14)

+1^^ I have motegi 17x7's but I also have an 03 es, I think my offset is too far out though cause over some bumps I can hear the tires hit the inside fenderwells

villero1834

iTrader: (1)

Sorry the specs for this rims are lug pattern 5x114.3 but offset is 0 (zero)

darkdrifter

Well they only come in the Zero offset so its going to take some work to get them to go on there. We are talking some negative camber and some major rolled fenders. You would also have to use a stretched tire. Like a 215/45-16.

villero1834

iTrader: (1)

so they will fit , i mean i have my fenders roll already and im getting coilovers , right now im rocking 18x235x40 so they would fit then right

JDM_CEDIA

If your looking 4 16"'s w/ different offset on XXR wheels (Primax) try the 501's or the New 522's that was released already. I have 2 complete sets on 501's (Black W/ polished Lip) & 522's (Gold) W/ and 0 off-set. All 16X8's But, u will need low PROFILE tires. Like 205/45/16 or 195/40/16 (RARE) Do NOT get 50 Series!!! They will rub every bump u hit.
Example:
http://www.xxrwheels.com/sportmax_501.shtml
http://www.xxrwheels.com/xxr_522_16.shtml

qaz003

iTrader: (1)

sorry for stealing this thread...but...those 522s are sick man...sooo if i wanted the 16X8 and 205/45/16 tires it will not rub...wouldnt i still need spacers so as to clear the suspension???

JDM_CEDIA

W/ an "0" off-set rim will pop out a lot. Now if u add spacers will even pop out more.. But, i rather go w/ a (40) series since it will rub a little bit w/ a 45, but it depends if its lowered or not. I will make a design on Fender flares out of polyurethane so that way it will look flushed. Exp. http://www.modiride.com/images/conte...ide_flares.jpg (ill make them Small/Medium & Large sizes for Universal fiments. Hope people will buy.