Car Stutters during take off, almost no power... picks up when u floor it.
#17
Newbie
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Phoenix, AZ
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Wires should get swapped anyway, for all I know there are 130k on them. Bought the car at 34k, I doubt they were changed. AFAIK they've never been changed, at least not by me.
#21
Newbie
iTrader: (1)
Join Date: Apr 2007
Location: Kansas
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Have you checked to see if your plugs/wires/coil packs yet? If they aren't burnt, then it is probably something else. I experienced something very similar and my car would stutter between 2k-3k rpms and 4k-5k rpms so flooring it wasn't really an option or i would CEL. I have the NGK spark plug wires in now(really like them) and 1 coilpack for now. The other isn't burnt (and hopefully not anytime soon either) but i got my stuff from www.prostreetonline.com. Fast shipping. NGK's for 24.48 or the stock ones for 24.71. Just saying, if they aren't burnt, maybe the problem lies somewhere else. Hate for you to spend money on parts you don't need to fix the problem, you know what i mean? Keep us updated
#22
Evolved Member
iTrader: (26)
Try here, you will save, : http://www.automedicsupply.com/index...440&height=900
#23
Newbie
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Phoenix, AZ
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
All fixed =)
I replaced the plugs and wires... and it's all good.
Had a reading done on the CEL, seems the #2 cylinder was misfiring, when I pulled the plug, it had a nice burn ring around the ceramic portion of the plug... all the others looked ok, but #2 was toast.
Also did a recharge of the A/C so it's blowing nice and cold.
w00t
Thanks for the help!
-Darren-
I replaced the plugs and wires... and it's all good.
Had a reading done on the CEL, seems the #2 cylinder was misfiring, when I pulled the plug, it had a nice burn ring around the ceramic portion of the plug... all the others looked ok, but #2 was toast.
Also did a recharge of the A/C so it's blowing nice and cold.
w00t
Thanks for the help!
-Darren-
#25
Newbie
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Phoenix, AZ
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
haha well it's COME BACK!! OH NOES!
I think the coil pack has had it.. cause I am getting the misfire on #2 again...
I am going to replace the coil packs since it seems to be burning the crap out of my plugs.
I think the coil pack has had it.. cause I am getting the misfire on #2 again...
I am going to replace the coil packs since it seems to be burning the crap out of my plugs.
#27
Newbie
Thread Starter
iTrader: (2)
Join Date: Mar 2003
Location: Phoenix, AZ
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
No...
I am going to replace the coil packs with new ones, swap the plugs with some nice quality plugs, change the timing belt too.
If this does not work I am going to go to the junk yard and snag another engine to swap it in....
I am going to replace the coil packs with new ones, swap the plugs with some nice quality plugs, change the timing belt too.
If this does not work I am going to go to the junk yard and snag another engine to swap it in....
#28
Evolved Member
iTrader: (18)
Join Date: Jul 2003
Location: Jackson, CA (NorCal, Sacramento)
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
well, ive done all that and it always came back. im also about to swap the engine. i just want it figured out before i go with my new engine and **** something up.