Notices
Lancer Troubleshooting Get help with any troubleshooting problems you may have.

Dome Light Problem

Thread Tools
 
Search this Thread
 
Old Mar 6, 2004 | 12:55 PM
  #1  
clight's Avatar
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 21
Likes: 0
From: Seminole, FL
Dome Light Problem

Hi everyone,
This is my first post here! I bought my 03 Lancer OZ on Tuesday around 8pm. It has 9000 miles on it, and it runs great.

Here goes my problem:

The dome light does not work when switched to door mode. It works in the "on" position, but it stays on. When I have it on the door position, it never works. Anyone got any ideas I could try to get it going?

If not, I can get it in sometime next week and it can be fixed under warranty.
Old Mar 6, 2004 | 02:54 PM
  #2  
TURBOit's Avatar
Evolved Member
iTrader: (26)
 
Joined: Sep 2003
Posts: 884
Likes: 0
From: long island, ny
sounds like electrical problem. bring it to mitsu.
Old Mar 6, 2004 | 03:02 PM
  #3  
alfredob1's Avatar
Evolving Member
iTrader: (7)
 
Joined: Feb 2003
Posts: 185
Likes: 0
From: SoCal
Does it not work with any of the doors or just one in particular.
Old Mar 6, 2004 | 03:03 PM
  #4  
TURBOit's Avatar
Evolved Member
iTrader: (26)
 
Joined: Sep 2003
Posts: 884
Likes: 0
From: long island, ny
oh yea, make sure its not in the off position either. lol, i know it sounds stupid. with all the doors closed put it ON so its on, then switch it over, it should go off, then open up the door, does it go on? try to switch it to a nother spot over. i dont remember how it goes i havent touched it in forever.
Old Mar 6, 2004 | 04:47 PM
  #5  
clight's Avatar
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 21
Likes: 0
From: Seminole, FL
Originally posted by alfredob1
Does it not work with any of the doors or just one in particular.
It's the same with all of the doors.

Originally posted by TURBOit
oh yea, make sure its not in the off position either. lol, i know it sounds stupid. with all the doors closed put it ON so its on, then switch it over, it should go off, then open up the door, does it go on? try to switch it to a nother spot over. i dont remember how it goes i havent touched it in forever.
No, it's not in the off position... first thing i checked. I tried the turn on, close door and switch to door... didn't work either... guessing it just needs to visit my local mitsu dealer for a warranty checkup.
Old Mar 6, 2004 | 07:37 PM
  #6  
Kelmar's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2003
Posts: 1,302
Likes: 0
From: .
Yeah, should be an easy fix. The light may be burnt out though (worth a check).

-where in seminole are you, and where are you going to school?
Old Mar 7, 2004 | 02:59 PM
  #7  
urbanknight's Avatar
Moderator
Bomb Squad Unit #02
iTrader: (14)
 
Joined: Aug 2002
Posts: 4,090
Likes: 1
From: Los Angeles, CA
Just to make sure, you know there are 3 switch positions, right? One side is always on, the other side is always off, and the middle is door mode.
Old Mar 7, 2004 | 10:39 PM
  #8  
clight's Avatar
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 21
Likes: 0
From: Seminole, FL
Originally posted by urbanknight
Just to make sure, you know there are 3 switch positions, right? One side is always on, the other side is always off, and the middle is door mode.
Yup... know that. Had my friend's dad look at (good with cars and custom stuff) it and he couldn't figure it out either, so it's monday now and it can go see someone at service to take a look at it.

Love my lancer!
Old Mar 7, 2004 | 11:24 PM
  #9  
rocketscience's Avatar
Evolving Member
 
Joined: Jan 2004
Posts: 337
Likes: 0
From: chicago
probably too late now, but did you check the pin switch?
Old Mar 8, 2004 | 02:38 PM
  #10  
clight's Avatar
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 21
Likes: 0
From: Seminole, FL
Went to the dealership today... they are ordering a new computer/controller for it... The lady at service said that it's working but for some reason it's not picking up the door signal so they are replacing the part on Thursday.
Old Mar 8, 2004 | 02:57 PM
  #11  
Kelmar's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2003
Posts: 1,302
Likes: 0
From: .
where did you end up taking it?
Old Mar 8, 2004 | 06:07 PM
  #12  
clight's Avatar
Thread Starter
Newbie
 
Joined: Mar 2004
Posts: 21
Likes: 0
From: Seminole, FL
I'm using Crown Mitsubishi in St. Petersburg since that's where I bought it from.
Old Mar 8, 2004 | 06:26 PM
  #13  
Bitnode's Avatar
Evolved Member
iTrader: (6)
 
Joined: Aug 2002
Posts: 539
Likes: 0
From: Greenwich, CT
bring it to mitsu
Old Mar 9, 2004 | 05:10 AM
  #14  
Kelmar's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2003
Posts: 1,302
Likes: 0
From: .
Good choice...
Old Mar 12, 2004 | 07:53 AM
  #15  
airlinevomitbag's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2002
Posts: 995
Likes: 0
From: Otsego Minnesota
Originally posted by clight
Went to the dealership today... they are ordering a new computer/controller for it...
A computer/controller... Hmmm if that doesnt sound like a crooked service manager...

Or it could be that the the 03 Mitsubishi Lancer OZ is so advanced in its design that even the dome light needs to be computer controlled.


Quick Reply: Dome Light Problem



All times are GMT -7. The time now is 09:09 AM.