2000 Hyundai Sonata V4 to V6
#17
Evolved Member
iTrader: (5)
Join Date: Mar 2004
Location: hershey,pa
Posts: 2,106
Likes: 0
Received 0 Likes
on
0 Posts
first off its an I4, not V4.
and second its going to be a little harder to fit a v6 into a i4 engine bay without some heft modifications. and you're going to need the new ecu,transmission, rewiring the engine will be alot more work than you want. and seeing how you probably won't be doing this yourself, its gonna cost you ALOT more than you want to spend.
and second its going to be a little harder to fit a v6 into a i4 engine bay without some heft modifications. and you're going to need the new ecu,transmission, rewiring the engine will be alot more work than you want. and seeing how you probably won't be doing this yourself, its gonna cost you ALOT more than you want to spend.
#20
Evolved Member
iTrader: (7)
Join Date: Dec 2001
Location: Chicago
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
You didnt open the hood before you got the new engine? Yikes.
Good luck with the swap. Sounds to me like you might be a bit over your head for an engine swapif you didnt even pop the hood. Not a bad thing, plenty of the members here would havea hard time with a swap, but in the future try to stay within your skill set, or learn from someone who has done it...
Good luck with the swap. Sounds to me like you might be a bit over your head for an engine swapif you didnt even pop the hood. Not a bad thing, plenty of the members here would havea hard time with a swap, but in the future try to stay within your skill set, or learn from someone who has done it...
#21
^ +1 I agree with that 110% which is why a couple buddies of mine are going to help me because they have both done numerous swaps. So, I figured the best way to gain some skills, is to do it first hand, so I was going to give it a shot. Of course, with assistance
Thread
Thread Starter
Forum
Replies
Last Post
evodude32
Evo Engine / Turbo / Drivetrain
16
May 8, 2013 08:55 PM
EVOX_SPEED3
The Loft / EvoM Car Talk Corner
19
Apr 2, 2010 02:22 PM