Milwaukee - America's Drunkest Evo Owners
#9721
EvoM Staff Alumni
iTrader: (15)
Join Date: Apr 2002
Location: Wisconsin
Posts: 2,464
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mack4477
and just a general question here. if the tires i have on there say 51 psi max...where should they be at for regular street driving??
I feel that the ES100's best street pressure is around 32-36.
If you want to race with them (not really good for autox and stuff like that), pump em up to like 40-44.
#9724
Newbie
iTrader: (6)
Join Date: May 2003
Location: Pewaukee, WI
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bolsen
I believe they are strech bolts which need to be replaced after being torqued down.
Mike, if you can't get 'em in time, I wouldn't worry about it.
#9726
Newbie
iTrader: (6)
Join Date: May 2003
Location: Pewaukee, WI
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dryad001
Bryan I need the bolt that holds the lower control arm to the steering knuckle. No clue what the PN is.
#9731
Evolved Member
iTrader: (12)
Bolts should be here tomorrow.
Funny story...I'm coming back from Renner on 18 and I'm with a friend about to go to lunch.
I hit a red light and decide, "hell, new clutch going in tomorrow, let's give this launch control a go"....hahaha, the stock clutch is smelly
The launch control works well but the 40k old stock clutch doesn't grip very well. Let's just say I moved very little the first .75 seconds of "launching" before I stopped hitting the gas. It finally hooked up at like 4500.
I'm still laughing. Car still drives fine but I had to try it before the install and didn't want to make the parts hotter than they had to be before we start tomorrow.
Funny story...I'm coming back from Renner on 18 and I'm with a friend about to go to lunch.
I hit a red light and decide, "hell, new clutch going in tomorrow, let's give this launch control a go"....hahaha, the stock clutch is smelly
The launch control works well but the 40k old stock clutch doesn't grip very well. Let's just say I moved very little the first .75 seconds of "launching" before I stopped hitting the gas. It finally hooked up at like 4500.
I'm still laughing. Car still drives fine but I had to try it before the install and didn't want to make the parts hotter than they had to be before we start tomorrow.