Fireball

iTrader: (15)

Nope, just two at my household, both mine.

bolsen

iTrader: (2)

Morning fochers! Congrats on the new car.

Fireball

iTrader: (15)

New progress from Sunday.

All the cancerous panels (bent) have been cut off, awaiting new parts to weld on now and then reassemble.

bolsen

iTrader: (2)

mmm i think one of these would look nice on there

dryad001

iTrader: (27)

Well here is the tracking number I got from Logic.

247496462004332 remember this is a fedex number.

Hopefully it will be here tomorrow so I can get a few runs done and re map the fuel in my car. Right now I am running timing about 2 degrees advanced from the stock ecu and it still seems pretty liner especially during tip in. I am usuing a new program for the UTEC so I can use a different wideband than the bulky TXS one. Here is the program page UTEC

I have logged a few runs on the 2.3 version and it worked but not to my liking so the writer of this program revamped it and now it seems like it works great. The thing I like the most about this is the log mapper, I have been searching for this for quite some time and all I can say is what a great tool this is. All I need now is my alky/meth injection and throw it back on the dyno to tune 4th gear. Since I am not a big fan of running the car to redline in 4th on the road.

bolsen

iTrader: (2)

Logic performance... LMAO!

Not to make yah feel bad, but it took over 6 months to get my harness order correct. Tho, Chris has given me some bad **** deals. He'll beat any price...

dryad001

iTrader: (27)

Fireball- who is doing your welding? That will take some time since what you are welding is AU. Im going to say 9-10 hours of just welding not including measuring and what not. Did you keep the old pieces for reference?

dryad001

iTrader: (27)

Chris and Dru are great, it wasn't their fault for the shipping mess, something happened with their warehouse communication. I have ordered a lot of things from them and everything was sent on time or in a timely manner, I can't say the same for a few other vendors on here like Rnr (liars, BS'ers), Edo performance, and a few others.

dryad001

iTrader: (27)

Anyone ever go on brewcitymuscle.com?

I just scanned it and what a bunch of idiots. Bee from Beyond the clutch killer is on there so you know it has to be pretty bad.

teamdomokun

iTrader: (9)

That guy sucks

bolsen

iTrader: (2)

I think they are just middle men. Everything is shipped straight from the distributer... I think they only sit in front of the PC and try to get orders.

dryad001

iTrader: (27)

Hey how do you like the AMS alky? Is that the one that uses the IC sprayer resivor?

Fireball

iTrader: (15)

It's not aluminum, if that's what you mean. Those structure pieces are steel.

The old stuff isn't really useful, it was pretty bent up. I kept the radiator support though, so I can use that for reference. I'll also have my MR sitting right there, if we need to check anything. The ONLY thing that could be slightly out of alignment is the fender, since none of the major structures were damaged at all.

But all I really need to do, is cut a template out of cardboard from the right side, and then make sure I have it high enough to match the left, and weld it in. It's not a whole lot of welding and noone of it is load bearing... it was all spot welding in the first place.

Should stop by and I'll show you a little more in detail. Here's the pic dumpsite if you wanna go through em:

http://www.evoclub.us/userpics/evo8rebuild

bolsen

iTrader: (2)

What F#$% has happened to Lazer 103????

dryad001

iTrader: (27)

Isn't it country now or something???? I've been in the garage most of the day, thank god for wireless internet radio.