Dry Sump Thread: More offerings are available!
#136
EvoM Guru
iTrader: (1)
Below 30? You don't really want to see below 60.
The following users liked this post:
Driv200 (Jun 6, 2018)
The following users liked this post:
Driv200 (Jun 6, 2018)
#138
EvoM Guru
iTrader: (1)
Mine does. Had a passenger verify it at Chuckwalla.
The following users liked this post:
Driv200 (Jun 6, 2018)
The following users liked this post:
Driv200 (Jun 6, 2018)
#141
EvoM Guru
iTrader: (2)
What are you running for tires?
Yea IIRC one of the RS Motors guys was saying on one of the other threads they still were seeing like 20-30psi through right handers with their racefab pan. When I get some time later I'll post up a vid of a lap around Gingerman that shows my pressure gauge.
Edit: Just watched a few laps on my phone and it looks like pressure doesn't go below 40 except during some wheel hop in one corner where it goes to like 35. Normal pressure was around 60 and on right handers and acceleration it goes to 40. This is with dom 15-50 @240-245F.
Yea IIRC one of the RS Motors guys was saying on one of the other threads they still were seeing like 20-30psi through right handers with their racefab pan. When I get some time later I'll post up a vid of a lap around Gingerman that shows my pressure gauge.
Edit: Just watched a few laps on my phone and it looks like pressure doesn't go below 40 except during some wheel hop in one corner where it goes to like 35. Normal pressure was around 60 and on right handers and acceleration it goes to 40. This is with dom 15-50 @240-245F.
Last edited by Ayoustin; May 1, 2018 at 02:17 PM.
The following users liked this post:
Driv200 (Jun 6, 2018)
#142
EvoM Guru
iTrader: (1)
255/40 NT01's.
The following users liked this post:
Driv200 (Jun 6, 2018)
#145
EvoM Community Team Leader
Im sure something like this exists, but it seems like it would be trivially easy to set up a little "IF RPM > X and Oil Pressure < Y then flash warning light" kind of system.
The following users liked this post:
Driv200 (Jun 6, 2018)
#146
EvoM Guru
iTrader: (1)
It would need to be a 3d look up- if RPM is this, and oil pressure <this, then flash warning light.
The following users liked this post:
Driv200 (Jun 6, 2018)
#147
EvoM Community Team Leader
Edit: Sorry i misunderstood what you where trying to say. Yes i think a lookup table is a good idea. Having many RPM and pressure points would make the system way more useful. What you described i think would be considered a 2d lookup table though, which is probably good enough.
Last edited by Biggiesacks; May 2, 2018 at 11:12 AM.
The following users liked this post:
Driv200 (Jun 6, 2018)
#148
EvoM Guru
iTrader: (1)
I bet if you ask nicely, perhaps bribe thoroughly, Mychailo (MrFred) could add a table for that as long as you give up a different analog input (rear o2 perhaps). I dont know if that would be able to trigger a CEL or something, but you would need to think it through to fully define.
I would guess, 2D map, RPM vs Pressure would be sufficient. Anything else may need another input which is probably not available.
I would guess, 2D map, RPM vs Pressure would be sufficient. Anything else may need another input which is probably not available.
The following users liked this post:
Driv200 (Jun 6, 2018)
#149
EvoM Community Team Leader
I bet if you ask nicely, perhaps bribe thoroughly, Mychailo (MrFred) could add a table for that as long as you give up a different analog input (rear o2 perhaps). I dont know if that would be able to trigger a CEL or something, but you would need to think it through to fully define.
I would guess, 2D map, RPM vs Pressure would be sufficient. Anything else may need another input which is probably not available.
I would guess, 2D map, RPM vs Pressure would be sufficient. Anything else may need another input which is probably not available.
The following users liked this post:
Driv200 (Jun 6, 2018)