Sup w/them 2024 Fall Projects?
#3811
#3812
i just received the fuse - do I screw this under the positive terminal adapter? or the actual wingnut, i guess as you mentioned. no additional nut came with it so I'll need to find something that attaches to the stud on this guy.
#3813
Replace the wing nut with a regular nut and bolt and screw to the fuse. In your picture there is the original fuse block see if theres a nut on there. It will be a standard m6 nut i assume anyway. The battery post piece will be M8.
Last edited by bee-raddd; Nov 29, 2021 at 04:09 PM.
#3814
googled pic
probably an m8 nut but your battery clamp looks like SAE. you can use the wing nut if you can tighten it. move your red cable to the "blue post" with higher amperage rating. these could be m6
probably an m8 nut but your battery clamp looks like SAE. you can use the wing nut if you can tighten it. move your red cable to the "blue post" with higher amperage rating. these could be m6
Last edited by ViciousLSD; Nov 29, 2021 at 11:17 AM.
#3815
This is what I received, and what's currently installed. I can mount the fuse to the terminal using the wingnut, but how do i mount the cable to the fuse? The cable seems a little too big for the fuse's stud, if that's what I am to do.
#3818
well no, but it will work in either direction (if you can actually install it backwards). I thought you said the cable terminal is too big... some washers can be used to sandwich the terminal, if I understand your concern
#3819
the red cable's copper connector is 2cm wide, vs opening for the fuse's stud being 1.3cm wide - so you're saying stack washers until it reaches a height that the connector can just sit on top of the washers?
#3820
Connect 1 to 1 and 2 to 2. If the terminal lug hole is too big i wouldnt worry about it just put a washer on either side of the terminal lug before you screw it down. when your free swing by an auto sparky and ask them to crimp a new lug on thats the right size will cost ya $5 and 5min of their time.
The following users liked this post:
ViciousLSD (Nov 30, 2021)
#3821
This is what I mean - thanks for the pic - (1) on the fuse is too small for (1) on the cable (i realize I took a pic of the negative terminal, pos and neg are the same size). it physically won't fit.
#3822
I would probably use this for my batt reloc, I just like corners
https://www.lowes.com/pd/Southwire-L...B&gclsrc=aw.ds
#3824
#3825
I actually skip all of that battery top parts due to the "little things" that come with it. Back when I was building the cage and doing this relocation in a pinch we got this from best buy:
https://rockfordfosgate.com/products/details/rffdagu/
It's a topic of conversation at every track day when people look in the engine bay and see this "sound system piece" lol where all of the positive connections come in (old front battery location).
https://rockfordfosgate.com/products/details/rffdagu/
It's a topic of conversation at every track day when people look in the engine bay and see this "sound system piece" lol where all of the positive connections come in (old front battery location).
The following users liked this post:
kyoo (Nov 30, 2021)