Sup w/them 2024 Fall Projects?
#4276
you could make up a spacer to space the brackets out so they clear the middle. or cut down the shape of the ducting so it clears but you will weaken them this way.
I found the girodisc material to be quite soft and you go through the disc thickness quite fast. Doesnt compare to a proper motorsport rotor like an AP racing rotor for example.
Optimal brake temps vary depending on what pads etc you have and their working range.
Pretty much what happens is each brake application the brake temp spikes. and then as you accelerate etc the temp comes back down. and then you brake again and it spikes again. without proper cooling to bring them back down between brake applications each spike increases the temp more and more. for example if you dont have sufficient cooling for ur brakes it will go like this: first application brake temp peaks at 500deg then comes back down to say 200deg but then you brake again and temp peaks at 700 the second time. and then only falls down to 400deg. and then you brake again and peak temp is now 900deg.
Obviously various things can affect this like the circuit layout, power level of car, weight of car, strength of braking system, ambient temperature, raining or not etc.
Generally you can get away with the temp constantly increasing if your only doing short runs but at some point you will hit boiling point of your fluid and then get brake fade.
I would also advise cooling for brakes because the more you keep the temps under control the more life you get from your wheel bearings and wheelspeed sensors etc. as they arent subjected to massive heat and spikes in temperature as much.
Best thing to do would be get your local brake supplier to paint mark your calipers and discs with their temp stickers or temperature sensitive paint and see what sort of temp your brakes are getting up to this will tell you if you need more or less ducting.
I found the girodisc material to be quite soft and you go through the disc thickness quite fast. Doesnt compare to a proper motorsport rotor like an AP racing rotor for example.
Optimal brake temps vary depending on what pads etc you have and their working range.
Pretty much what happens is each brake application the brake temp spikes. and then as you accelerate etc the temp comes back down. and then you brake again and it spikes again. without proper cooling to bring them back down between brake applications each spike increases the temp more and more. for example if you dont have sufficient cooling for ur brakes it will go like this: first application brake temp peaks at 500deg then comes back down to say 200deg but then you brake again and temp peaks at 700 the second time. and then only falls down to 400deg. and then you brake again and peak temp is now 900deg.
Obviously various things can affect this like the circuit layout, power level of car, weight of car, strength of braking system, ambient temperature, raining or not etc.
Generally you can get away with the temp constantly increasing if your only doing short runs but at some point you will hit boiling point of your fluid and then get brake fade.
I would also advise cooling for brakes because the more you keep the temps under control the more life you get from your wheel bearings and wheelspeed sensors etc. as they arent subjected to massive heat and spikes in temperature as much.
Best thing to do would be get your local brake supplier to paint mark your calipers and discs with their temp stickers or temperature sensitive paint and see what sort of temp your brakes are getting up to this will tell you if you need more or less ducting.
#4279
I plan to have proper installation instructions on the website to answer installation questions upfront for customers. In the mean time feel free to message me about any uncertainties.
#4280
is that the part we made a sample of years ago?
#4281
Wait, camber and toe arms are different. Do you mean adjustment bolt on the toe arm? Is it stuck in your car?
Yeah, if you recall we weren't able to get them made right and they were quite the pain for your fab guy. Partly my fault, I should have made a welding fixture to locate the mounting holes and tabs relative to each other and give the right angle position on the tube.
Yeah, if you recall we weren't able to get them made right and they were quite the pain for your fab guy. Partly my fault, I should have made a welding fixture to locate the mounting holes and tabs relative to each other and give the right angle position on the tube.
#4282
sorry for the confusion. toe bolt, and it just tapped out. were having trouble now with lining up the fixed bits for the toe but calling it a night for now. obviously not how that black pieces is supposed to sit.
#4284
#4285
yeah those were a PIA. A lot of metal forming in a short distance!
#4286
#4287
also, the bracket itself partially covers the area that would have received the air. not like the bracket beeradd uses which incorporates a hole
#4290