Sup w/them 2024 Fall Projects?
#4291
rockauto also jacked up the price of the rear left, randomly. going over to my buddy's tonight to give one last shot at pulling the rear sensors out. if not, i think i'm gonna go with the $30 "economy" sensors and roll the dice i guess. if one ends up bad, how will i know which one it is? will there be a CEL? or do I need to do it by process of elimination?
Hammer.
#4293
#4296
https://www.evolutionm.net/forums/ev...d-install.html
quick tip since I just did this. dont spin the driver side axle once you remove the cover or else you might struggle putting back the cover
Last edited by ViciousLSD; Feb 4, 2022 at 02:12 PM.
#4297
not hard, not easy
https://www.evolutionm.net/forums/ev...d-install.html
quick tip since I just did this. dont spin the driver side axle once you remove the cover or else you mmight struggle putting back the cover
https://www.evolutionm.net/forums/ev...d-install.html
quick tip since I just did this. dont spin the driver side axle once you remove the cover or else you mmight struggle putting back the cover
#4298
Yeah the diff can be swapped without unbolting the tcase from the trans. I was under the impression you had to remove both output shafts from the tcase/trans to free the diff, but maybe that's not correct. One thing I would advise, considering the age, it might be a good idea to pick up new seals in case you encounter one that isn't reusable. Wouldn't hurt to just replace every seal you encounter with a new one while you are in there. Mission creep though......
#4299
#4300
#4302
Yeah the diff can be swapped without unbolting the tcase from the trans. I was under the impression you had to remove both output shafts from the tcase/trans to free the diff, but maybe that's not correct. One thing I would advise, considering the age, it might be a good idea to pick up new seals in case you encounter one that isn't reusable. Wouldn't hurt to just replace every seal you encounter with a new one while you are in there. Mission creep though......
#4303
#4304
i got a little egr blocking plate haha. need to keep all that stuff in there so it looks like i'm emissions compliant.
long story short, there have been a few more... incidents with ATS front diffs. I thought the problem would be more isolated to big grip, big tire/r-comp, concrete and launching but that does not seem to be the case. I think there is a revised case/housing now though. Looking into it a bit more.
long story short, there have been a few more... incidents with ATS front diffs. I thought the problem would be more isolated to big grip, big tire/r-comp, concrete and launching but that does not seem to be the case. I think there is a revised case/housing now though. Looking into it a bit more.