Sup w/them 2024 Fall Projects?
#5116
For the daily's it's usually between amsoil and off-shelf Prestone, it has a surprisingly high boil and good feel for non-abused systems. I think I was one of the first ones in here reviewing RF650 improvements over SRF. Awesome stuff.
#5117
ots stuff from autozone ftw for my dailies haha
#5118
I'm the ENDLESS distributor in New Zealand - it really is that good.
Very easy to swap guys over from Motul/AP RBF660, the pedal feel is much better.
Essentially if you have brake problems with ENDLESS RF650, it aint the brake fluid.
Yup Brembo HTC64 is very good also
Very easy to swap guys over from Motul/AP RBF660, the pedal feel is much better.
Essentially if you have brake problems with ENDLESS RF650, it aint the brake fluid.
Yup Brembo HTC64 is very good also
#5119
Originally Posted by RSMike
I'm the ENDLESS distributor in New Zealand - it really is that good.
Very easy to swap guys over from Motul/AP RBF660, the pedal feel is much better.
Essentially if you have brake problems with ENDLESS RF650, it aint the brake fluid.Yup Brembo HTC64 is very good also
Very easy to swap guys over from Motul/AP RBF660, the pedal feel is much better.
Essentially if you have brake problems with ENDLESS RF650, it aint the brake fluid.Yup Brembo HTC64 is very good also
The following users liked this post:
RSMike (Feb 21, 2023)
#5123
#5124
ugh I forgot his handle. I think its @white_turbo , you can check with him where the NY Metro evos go for tuning
#5126
looking for actual flex, with something like this:
https://www.evodynamics.com/products...-flex-fuel-kit
https://www.evodynamics.com/products...-flex-fuel-kit
#5127
looking for actual flex, with something like this:
https://www.evodynamics.com/products...-flex-fuel-kit
https://www.evodynamics.com/products...-flex-fuel-kit
#5128
after my most recent experiences i really, REALLY do not trust some of the more popular shops to actually give a **** about the customer cars they work on
#5129
separate note, for the guys running harnesses on roll bars, did you guys just weld a loop on for the harness to pass through?
i was looking at this solution (https://rennscot.com/products/rspro-...31783378190474) which i think is intriguing - easy to install/remove, quick and easy solution. not sure if people will scoff at a locking collar to hold the harness in place for side-to-side motion, but some don't use anything at all?
i was looking at this solution (https://rennscot.com/products/rspro-...31783378190474) which i think is intriguing - easy to install/remove, quick and easy solution. not sure if people will scoff at a locking collar to hold the harness in place for side-to-side motion, but some don't use anything at all?
#5130
I lose sleep over this + $ and hours of rework. their mechanics got evo project cars that could use someone's evo parts too lol