When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
circling back tot he acd pump relocation discussion - looking under the car, it looks like if you want everything on the driver's side, you have to get rid of some emissions stuff for the usdm 8/9s - not an option for me. we can locate everything, pump and all, inside the trunk on the driver's side, or relocate it on the passenger's side with the potential of exhaust heat issues - thoughts?
also - anyone got a line on some inexpensive x calipers? mine need to be redone/replaced.
There's a bit of space in board of the Evap stuff. I'll post my pics after work today. I have both my surge tank and the ACD pump in that location.
There's a bit of space in board of the Evap stuff. I'll post my pics after work today. I have both my surge tank and the ACD pump in that location.
thanks - we decided just to mount it all inside the trunk, on the passenger's side for better weight dist. keeping it inside the trunk should keep it away from the heat from the exhaust at least.
It might be tight actually to mount it inboard of the Evap equipment. The black reservoir is too big in diameter. Here is my radium fst mounted in that position. You could mount it further forward to clear the widest part of the trunk pan but it might get close to the mustache bar (assuming you still have that). Mounting in the trunk like the Evo X relocation kits has some drawbacks but can definitely work.
Last edited by deeman101; May 20, 2021 at 10:30 PM.
Doesn't that kinda make the point moot with it being laid flat like that?
The surge tank? It's at a 45 degree angle. Maybe not clear from the pics. You could mount it horizontally with the right pump / fuel sock but that doesn't work so well for my E5LM pump.
yea just on the pass side in the trunk i think is where we're gonna go with it. will have to trim the trunk liner if i want to put it back in, which i think i do.
very tangential here - if you do youtube stuff for your car, can you expense parts and stuff? obviously there are big names like gears & gasoline but i've got a car-related llc, and the thought just occurred...
I have no idea what the evap is but the JDM pump is located in the left rear corner of the rear bumper under the boot floor outside of the chassis rail.
May 20, 2021, 08:17 AM
