Jaraxle

Speaking of solid state fuel pump solutions for Evos....
Is the Kaizen solution like this?
OEM ECU controlled DIY dual voltage big pump controller - EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

deeman101

iTrader: (34)

The crydom SSRs come up a lot on google for pump controllers. I don't think they were specifically made for automotive applications like the Hella SSR. Crydom makes a lot of residential and industrial relays. But it does seem like a lot of people on the internet use it with success.

TimC909

Kaizen Relay – KAIZENSPEED

Hopefully the link works. These relays can be joined together, controlled by CAN with a module that joins on the side. Pretty flexible things.

I like the MSD thing that Shaun has posted though.

deeman101

iTrader: (34)

They look interesting. Only thing is the pwm frequency seems low at max 225hz.

Terror Rising

iTrader: (26)

We took the keys to this garage yesterday. Let the fun begin!

Dallas J

iTrader: (1)

Do you have to share with the wife or will she let you have it all?

Terror Rising

iTrader: (26)

She just bought an IS350 F-sport so she gets the two car side since she can't park a car to save her life. In her world parking on the line is the same as parking inside the lines. I can always build a second garage at the tail of the driveway. I might put up a guardrail to protect the Evo for the meantime.

BLACKzj52

Building a 64 based 2.2L after my stock rod decided to put numerous holes in the block. These damn custom pistons for the 64/94/156 combo seem to be a pain in the ***.

Can anybody check my information regarding specs I am going to give to Wiseco, please? I've compiled most of this info from searching around both the forums and Wiseco's site.

Block Height: 235mm (4G64)
Stroke: 94mm
Rods: 156mm
CR: 9.0:1
Cylinder head CC: 43cc






Compression Height: 32mm/1.248"
Volume: -21cc ?
Deck clearance: 0.3mm ?
Headgasket: .042"/1.1mm (stock evo 9 1005A700)

LetsGetThisDone

iTrader: (1)

You don't want the stroke/rod/piston to add up to zero deck. Best way is to measure current deck clearance with knock comp height pistons.

Also, stock 9 head gasket is .051".

Shoot for .010" in the hole. By the time the deck gets resurfaced, it'll prob be more like .003-5" in the whole.

Construct

iTrader: (4)

That's a great purchase.

Looks like it comes with a bonus house attached, too.

kaj

iTrader: (60)

Ouch

Terror Rising

iTrader: (26)

She's the breadwinner. I'm just a Director of Engineering while she's a CFO. She has way more money into this than I do.

Dallas J

iTrader: (1)

Lawdy, with them titles I expect a 10car garage

RallySport9

iTrader: (20)

Not if you're raising kids. Each one costs about as much as a ten car garage.

Dallas J

iTrader: (1)

I got one (8 y/o), it aint that bad :P.