Sup w/them 2024 Summer Projects?
#6213
EvoM Guru
iTrader: (4)
The entire underside of the Supra is well designed to be relatively flat. Those pieces are more for continuity of the flat bottom. I don't know if they'd do a whole lot on an Evo unless it was part of a larger effort to create a semi-continuous flat bottom extending to the rear of the car.
#6214
Evolved Member
iTrader: (29)
The entire underside of the Supra is well designed to be relatively flat. Those pieces are more for continuity of the flat bottom. I don't know if they'd do a whole lot on an Evo unless it was part of a larger effort to create a semi-continuous flat bottom extending to the rear of the car.
#6216
Evolved Member
iTrader: (127)
find "LHD". you made me rush to complete my purchase lol
https://www.rosssport.com/Catalogue/...XTERIOR/LIGHTS
https://www.rosssport.com/Catalogue/...XTERIOR/LIGHTS
#6220
EvoM Guru
iTrader: (6)
Got exhaust mani bolts sealed up. Cleaned and sprayed header with VHT white to match Swaintech coating which I read on their website takes paint well. Also put VHT copper gasket cement on both affected gaskets, reused old ones.
Also found my driver rear CV boot bust have a breach, grease sprayed in barrel of the upright, so thats next project. Tomorrow off to get tints. Quickjack worked great, with all the vehicles around I imagine I'll get my money with of use.
Also found my driver rear CV boot bust have a breach, grease sprayed in barrel of the upright, so thats next project. Tomorrow off to get tints. Quickjack worked great, with all the vehicles around I imagine I'll get my money with of use.
The following users liked this post:
ViciousLSD (Jun 27, 2024)
The following users liked this post:
V.8MR (Jun 27, 2024)
#6224
Evolved Member
I'm going to be designing and offering that for the Evo X (entire flat bottom). But it has not been started yet as the Evo X is unfortunately a dying platform.
#6225
EvoM Guru
iTrader: (2)
@Dallas J @LetsGetThisDone
Gents, can you please check if I got the right idea here. I didn't have time to test with the belt. Thanks
Gents, can you please check if I got the right idea here. I didn't have time to test with the belt. Thanks