Sup w/them 2024 Summer Projects?
#6226
EvoM Guru
iTrader: (1)
The easiest way to do it is put the belt on. Then you now disregard the timing mark on the cogged part of the gear, and instead line up the timing mark on the center portion with the mark on the valve cover.
Last edited by LetsGetThisDone; Jun 28, 2024 at 03:45 PM.
The following users liked this post:
ViciousLSD (Jun 28, 2024)
The following users liked this post:
ViciousLSD (Jun 28, 2024)
#6228
Evolving Member
The following users liked this post:
ViciousLSD (Jun 28, 2024)
#6230
EvoM Guru
iTrader: (2)
JDM 9 valve cover does have a different pcv set up on the back with a different sized hole in the cover so you would need the jdm pcv too, unless you modify it to run an lines. STM sells the JDM cover too but they want $600 LOL. I love STM but I find myself going elsewhere more and more lately for oem parts because of their pricing.
The following users liked this post:
ViciousLSD (Jun 29, 2024)
#6233
EvoM Guru
iTrader: (1)
Where the mark is on the outer gear doesn't (really) matter. As long as there's enough adjustment for the middle part to line up with the timing mark on the valve cover. You can get the outer gear "close" for your sanity, but it really doesn't matter.
#6235
EvoM Guru
iTrader: (1)
Looks close enough. Hard to tell since the photos aren't straight on angle.
The following users liked this post:
ViciousLSD (Jun 29, 2024)
#6236
EvoM Guru
iTrader: (6)
Now with tinted windows. Will prob try and order a seibon wingless trunk lid or an equivalent so I have a more stealthy trunk. Swap in oe arms with poly bushes and perhaps 2k less springs so I can drive this car. Else it's a track weapon that never sees the track and therefore is never used.
#6237
Evolved Member
iTrader: (20)
JDM 9 valve cover does have a different pcv set up on the back with a different sized hole in the cover so you would need the jdm pcv too, unless you modify it to run an lines. STM sells the JDM cover too but they want $600 LOL. I love STM but I find myself going elsewhere more and more lately for oem parts because of their pricing.
600 is honestly cheap for a new mg valve cover and youl be lucky to even find one new at all when it's discontinued. You need to pay to play especially when a car is 20 years old.
#6238
Evolving Member
Where are you going for parts exactly? I've checked Amayama and the list price is way cheaper, then when you check out and calculate shipping it's so expensive it makes up for the difference. You can't find new oem parts for much less than stm. The only thing overpriced is their small stuff. Screws, clips ect..
600 is honestly cheap for a new mg valve cover and youl be lucky to even find one new at all when it's discontinued. You need to pay to play especially when a car is 20 years old.
600 is honestly cheap for a new mg valve cover and youl be lucky to even find one new at all when it's discontinued. You need to pay to play especially when a car is 20 years old.
#6239
Evolved Member
iTrader: (29)
any stock or stock frame turbo guys running the artec exhaust manifold on here?
https://artecperformance.com/product...41877671903404
https://artecperformance.com/product...41877671903404