tune & dyno my evo 8
#1
Evolving Member
Thread Starter
Join Date: May 2003
Location: DALLAS,TX
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
tune & dyno my evo 8
I just got tune and dyno saturday. The mods I have are fp hta white ,act streetlite flywheel w/clutch , greddy catback , and a k&n drop in and everything else is stock. I made 254 ft tq / 246 hp on a mustang dyno. Are those good number and what else do ya reconmend for my next mod.
#3
Evolving Member
Thread Starter
Join Date: May 2003
Location: DALLAS,TX
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
He didn't want to tune it out max cause of my injector and not enough fuel, But he got it up to 280 then it went down from there w/ no fuel oh awd tuning did it
#6
Evolving Member
iTrader: (9)
Join Date: Oct 2006
Location: DFW, Tx
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
the injectors holding you back is one thing, but the FP white was designed for spool up, did you buy it from Laramie? because he bought it from Mark who had it build for autocross and has a 9.0 hotside, aka fast spool. That could explain the somewhat higher torque over the HP. You get that with stock turbos too, but it should be noted that the white is built for spool, not max HP.
for sure get a DP, 02 housing as soon as possible, porting the exhaust maifold will help also, you want everything into and out of the turbo exhaust side to be able to "breath" as much as possible...
what are you doing for boost control? 3port?
for sure get a DP, 02 housing as soon as possible, porting the exhaust maifold will help also, you want everything into and out of the turbo exhaust side to be able to "breath" as much as possible...
what are you doing for boost control? 3port?
Last edited by denver; Apr 19, 2010 at 07:26 PM.
#7
Evolved Member
iTrader: (49)
Like others have already mentioned you really need to open things up and let your engine breath. An intake pipe with open element filter, MBC, ported exhaust manifold, SS o2 housing, 3" downpipe, and a 3" testpipe would do wonders for your car.
A few links for you:
https://www.evolutionm.net/forums/ev...-100-time.html
https://www.evolutionm.net/forums/ev...t-results.html
https://www.evolutionm.net/forums/no...dding-day.html
I find it very hard to believe you were running out of fuel injector with your current setup. I'd maybe believe fuel pump since the VIII pump is smaller than the IX's (the IX pump is proven to flow enough to support over 300whp on a Dyno Dynamics which reads lower than a Mustang), but no way are your injectors even close to being maxed. The stock 560's should be good for at least 325+ on a Mustang dyno. Also keep in mind that indicated IDC in EvoScan is not true IDC.
A few links for you:
https://www.evolutionm.net/forums/ev...-100-time.html
https://www.evolutionm.net/forums/ev...t-results.html
https://www.evolutionm.net/forums/no...dding-day.html
I find it very hard to believe you were running out of fuel injector with your current setup. I'd maybe believe fuel pump since the VIII pump is smaller than the IX's (the IX pump is proven to flow enough to support over 300whp on a Dyno Dynamics which reads lower than a Mustang), but no way are your injectors even close to being maxed. The stock 560's should be good for at least 325+ on a Mustang dyno. Also keep in mind that indicated IDC in EvoScan is not true IDC.
Last edited by Kracka; Apr 19, 2010 at 07:51 PM.
Trending Topics
#8
Hey Jorge, it was great having you out on Saturday. I can't wait to see what that thing can do once you get bigger injectors and maybe a boost controller. (at the very least)
And as far as the dyno, I believe that a stock 8 put down 220whp on our dyno (Kevin can correct me if I'm wrong).
-Mary
And as far as the dyno, I believe that a stock 8 put down 220whp on our dyno (Kevin can correct me if I'm wrong).
-Mary
Last edited by grimlin; Apr 19, 2010 at 07:49 PM.
#10
Evolved Member
iTrader: (5)
Hey Jorge, it was great having you out on Saturday. I can't wait to see what that thing can do once you get bigger injectors and maybe a boost controller. (at the very least)
And as far as the dyno, I believe that a stock 8 put down 220whp on our dyno (Kevin can correct me if I'm wrong).
-Mary
And as far as the dyno, I believe that a stock 8 put down 220whp on our dyno (Kevin can correct me if I'm wrong).
-Mary
#12
and for the record his IDC was high but not exactly maxed out (95%) but since he has more upgrades to come soon, then Keith didn't feel that there was a reason to push the turbo anymore than what Jorge was happy with.
#14
Evolved Member
iTrader: (13)
Join Date: May 2006
Location: Seattle, WA
Posts: 779
Likes: 0
Received 0 Likes
on
0 Posts
In this order, here's what you need:
1) upgraded fuel pump
2) manual boost controller
3) O2 housing and downpipe
4) injectors
the fpWhite is a madman - you just need the supporting mods to make it happen. Shore up your fuel delivery and boost control, and you're good to go.
1) upgraded fuel pump
2) manual boost controller
3) O2 housing and downpipe
4) injectors
the fpWhite is a madman - you just need the supporting mods to make it happen. Shore up your fuel delivery and boost control, and you're good to go.
#15