local Pittsburgh Meet
#6946
Evolving Member
iTrader: (6)
Join Date: May 2007
Location: Pistolvania
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Im going to try to get to the meet saturday but not sure yet cause i think my slave cylinder is all messed up. Im running an act street clutch and whenever i shift now, the pedal sticks to the floor. Always something. I also have a 5 hour drive back home to philly on sunday, but ill definitly try to make it.
Don't bust your ***** to make this one, its a small get together...kinda late too...our bigger ones are at the waterfront and a lot more fun with dave and busters being right there
#6947
Evolving Member
yea i was there saturday but my two buddies i was with werent 21 so we left, plus with finals i wanted to get some studying in. Ill see how the car is running and if its good ill come if not it will probably just stay under the cover for the night
#6948
Evolved Member
iTrader: (7)
V8 eater...I have the same clutch...same thing happened shortly after install. Can you describe how bad the clutch play is? Mine was catching maybe an inch off the floor. Sticking like crazy. Turns out we didnt fully connect the TOB to the pressure plate properly...it wasnt fully engaged. You might have to go back under the car, look through that little adjustment hole in the transmission housing and make sure it is completely engaged. It worked fine after I did that.
#6949
Evolving Member
iTrader: (6)
Join Date: May 2007
Location: Pistolvania
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Hey man, yeah, i'm a wild card on this one. Considering the lack of D&B and the hike to get there, its really gonna depend on the current mood. By the way, I dunno if you saw my last post to you, but I don't think that MAF pipe has the nitrous connected to it...which is what I was looking for. That and the cone filter. 100 bucks and i'll swap it out for my stocker with a K&N drop-in...let me know .
Anyway about the MAF pipe...my bad...I was thinking of the upper intercooler piping? But on Wednesday we are stripping it down and I will let you know then...PM me your cell if you want and I'll give you a call then.
#6950
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
MEET THIS WEEKEND AGAIN
When? Saturday, December the 15th @ 8:00PM
Where? Miracle Mile Shopping Center
Confirmed List
Canexican think you'll make this one? J/w
When? Saturday, December the 15th @ 8:00PM
Where? Miracle Mile Shopping Center
Confirmed List
- OurLancerEVOs (Red VIII)
- garcia10 (Silver IX MR)
- Evolved (White VIII)
- spumoni1984 (IX)
- Thegame (Silver VIII)
- EvoDan (Blue VIII)
- arbo651 (Red VIII)
- travman (Silver IX)
Canexican think you'll make this one? J/w
#6951
Evolving Member
iTrader: (6)
Join Date: May 2007
Location: Pistolvania
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
My bad! what the heck? lol
MEET THIS WEEKEND AGAIN
When? Saturday, December the 15th @ 8:00PM
Where? Miracle Mile Shopping Center
Confirmed List
MEET THIS WEEKEND AGAIN
When? Saturday, December the 15th @ 8:00PM
Where? Miracle Mile Shopping Center
Confirmed List
- OurLancerEVOs (Red VIII)
- garcia10 (Silver IX MR)
- Evolved (White VIII)
- spumoni1984 (IX)
- Thegame (Silver VIII)
- EvoDan (Blue VIII)
- arbo651 (Red VIII)
#6952
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Rob...sorry but I'm going to have to get you to add me on that list again
I totally forgot my gf's company x-mas party is sat. night so I am free.....kinda nice how that works out
I totally forgot my gf's company x-mas party is sat. night so I am free.....kinda nice how that works out
#6953
Evolved Member
iTrader: (33)
Join Date: Jul 2006
Location: PA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
I bought a ss clutch line from works, a little more expensive but very nice. I haven't decided if I want to remove the pill completely or drill it out some. I'm still on stock clutch though.
#6954
Evolving Member
V8 eater...I have the same clutch...same thing happened shortly after install. Can you describe how bad the clutch play is? Mine was catching maybe an inch off the floor. Sticking like crazy. Turns out we didnt fully connect the TOB to the pressure plate properly...it wasnt fully engaged. You might have to go back under the car, look through that little adjustment hole in the transmission housing and make sure it is completely engaged. It worked fine after I did that.
Yea most people are suggesting that it is the tob. Yea its catching about an inch off the floor where it is enough for me to pop back up with my foot, but still ridiculously annoying. Im not to familar with any shops around here and taking the evo back home to west chester on sunday after finals are over. Ill hit up my shop when i get home so we can throw it on a lift and get under there. Evo will be coming back to Pitt March 5th. Thanks bro.
#6957
Evolving Member
haha where at...i grew up about 2 minutes from north park. Im leaning towards the fact that ill most likely show at the meet saturday night for a little.
#6958
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
If you want to make the 10 min trek up 279 I can meet you off Mcknight road? All kinds of places there and is easy to get in and out ....Or if you know somewhere in Oakland that isnt a total cluster **** to get in and out...haha
Anyway Let me know.