local Pittsburgh Meet
Evolving Member
iTrader: (8)
i spent saturday scraping all off the clearcoat off of the brembos and resprayed with new high temp clearcoat....im suprised how good they turned out....i will post some pics when i get a chance....but no more funky pink looking brembos
Evolving Member
iTrader: (8)
jer didn't have good luck doin his rears, good thing he didn't care. i had to stop him from using a dremel and sawzall!
i'll find out for ya. what's your name? i'm Paul.
i'll find out for ya. what's your name? i'm Paul.
Evolving Member
iTrader: (8)
My name is brian......i dont think i need to go a whole lot...the rotas on there now have about a finger width of clearance and they are +29 offset....the rears on the new wheels are +26 so i think i might be just a bit short....
Evolved Member
iTrader: (10)
Newbie
iTrader: (4)
Join Date: Nov 2008
Location: State College, PA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
nice to meet ya! i texted him and it's a go. when are you doing this?
Evolved Member
iTrader: (10)
Evolved Member
iTrader: (9)
Join Date: Jan 2004
Location: Cedarburg, WI
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
Well actually its the fronts that are really a *****. It's because the lip is so small to begin with that its hard to bend it without bending the alluminum fenders. Also, i'll assume you understand you will need a heat gun also? I have one if you need to borrow it!
So what size tire are you plan on running? There are more issue you will run into then just the lip if your going big. Like the seams and the bolt to hold on the rear bumper. I had to cut off some of the tab for the rear bumper to make my wheels work. Now i am running 285's so it might not be a big deal if your going to run a 265
Evolved Member
iTrader: (10)
Evolved Member
iTrader: (9)
Join Date: Jan 2004
Location: Cedarburg, WI
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
looks like 265's to me Paul. . And those are still small IMO. Heck run some 295's or 315 if you want a more aggesive look. Or just go buy some spacer!
Evolved Member
iTrader: (10)
id rather not with the tires.. I have spacers I threw on(no spacers in the pics) but im going with something like a +15 most likely