local Pittsburgh Meet
Evolved Member
iTrader: (10)
Evolving Member
iTrader: (8)
i think i should be ok on the fronts...the way the car sits now i plenty of clearance...i was thinking either 255/35 or 265 35......... probably a couple of weeks....the wheels should be here in a week then i have to get the tires mounted....
Evolved Member
iTrader: (10)
Join Date: Aug 2005
Location: pittsburgh
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
255's shouldn't be a problem. my summer tires are 255/45/17 and they fit nicely with the lowering springs. any larger though and you will definitely need to do some convincing of the fenders.
ok, lemme know.
Evolved Member
iTrader: (9)
Join Date: Jan 2004
Location: Cedarburg, WI
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
Your more then welcome to do whatever you want to your own car.
You have a nice set of wheels there! I'm not sure what you think a different offset is going to give you in looks? Can you give us your thoughts on what you are going for? Are you looking for a more concave look with a bigger lip? In addition, Seems you are building a nice X with your mod list, is this a show car? If so, it will go too!
Evolved Member
iTrader: (10)
Your more then welcome to do whatever you want to your own car.
You have a nice set of wheels there! I'm not sure what you think a different offset is going to give you in looks? Can you give us your thoughts on what you are going for? Are you looking for a more concave look with a bigger lip? In addition, Seems you are building a nice X with your mod list, is this a show car? If so, it will go too!
You have a nice set of wheels there! I'm not sure what you think a different offset is going to give you in looks? Can you give us your thoughts on what you are going for? Are you looking for a more concave look with a bigger lip? In addition, Seems you are building a nice X with your mod list, is this a show car? If so, it will go too!
Basically I am just enjoying the car and modding it to my liking based on performance first. I just want a more flush look with the wheels.. thats all
The wheels are just for looks, along with the springs...I didnt go with the full coilover setup because I felt it was unnessisary for what I do with the car.
As far as shows go I might put it in a few just for fun but thats about it.
Thanks for the comments.
Evolving Member
iTrader: (8)
Well actually its the fronts that are really a *****. It's because the lip is so small to begin with that its hard to bend it without bending the alluminum fenders. Also, i'll assume you understand you will need a heat gun also? I have one if you need to borrow it!
So what size tire are you plan on running? There are more issue you will run into then just the lip if your going big. Like the seams and the bolt to hold on the rear bumper. I had to cut off some of the tab for the rear bumper to make my wheels work. Now i am running 285's so it might not be a big deal if your going to run a 265
So what size tire are you plan on running? There are more issue you will run into then just the lip if your going big. Like the seams and the bolt to hold on the rear bumper. I had to cut off some of the tab for the rear bumper to make my wheels work. Now i am running 285's so it might not be a big deal if your going to run a 265
Evolved Member
iTrader: (26)
Join Date: Oct 2005
Location: Pittsburgh
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
g i have always been a wheel guy..loll.....i loved the look of the work vs tx they are staggered 28 offset on fronts and 26 on rears....they have a really wide lip on the rear wheels....i think i will keep my rotas to come to auto x this year since there doesnt seem to be anyone who wants them
btw - is your afr staying in check? haven't talked to you in a while....
Newbie
iTrader: (4)
Join Date: Nov 2008
Location: State College, PA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Just checked my car after getting the touchless wash last night at Rapid Wash on South Park Road. Looks much better, but I can see a few spots where there is a thin white film left by the wash (came off with a cloth). Not perfect, but does the job in the winter. It also didn't seem to do much to clean the wing. I may need to get the CF touched up on that soon.
Evolving Member
iTrader: (8)
when i did drive it , it was pretty good....but i havent driven it much since then....i figure i might as well let the honda take all of the winter abuse...
Evolved Member
iTrader: (9)
Join Date: Jan 2004
Location: Cedarburg, WI
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
I am mostly just going for a car I can take out on the weekends and have a little bit of fun with..I do not race this car in autocross etc... The only track it sees is the strip on occasion, but I have only had it there one time so far.
Basically I am just enjoying the car and modding it to my liking based on performance first. I just want a more flush look with the wheels.. thats all
The wheels are just for looks, along with the springs...I didnt go with the full coilover setup because I felt it was unnessisary for what I do with the car.
As far as shows go I might put it in a few just for fun but thats about it.
Thanks for the comments.
Basically I am just enjoying the car and modding it to my liking based on performance first. I just want a more flush look with the wheels.. thats all
The wheels are just for looks, along with the springs...I didnt go with the full coilover setup because I felt it was unnessisary for what I do with the car.
As far as shows go I might put it in a few just for fun but thats about it.
Thanks for the comments.
Newbie
iTrader: (10)
Join Date: Dec 2008
Location: Pittsburgh
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I have to do this soon. Im very interested to see the turnout. Where did you get the high temp clearcoat at?
Evolving Member
iTrader: (8)