calvinwch

iTrader: (2)

MEET DELAY MEET DELAY until March 1 starting 2pm, car onwer who has hood install will be there at or before 4PM

For people who live around new york city, let's meet at the coming Saturday March 1. Meet base are for people who want to check out the USD Lancer full carbon hood that i have install on one of the Lancer owner here.

Time will be around 2pm-4/5pm.

Location will be at Long Island, New Hyde Park.

Nearest highway are Grand Central Parkway exit 25.

I will confirm the owner of the car have the time at 4pm

Any one who like to come and see, please post.

Car owner has confirm, MEET will be set at March 1, 2003 at 4pm. If you wish to come early i will be there at 2pm.
address is at
1111 2nd AVE
New Hyde Park, NY 11040

check map at http://maps.yahoo.com
nearest highway at
GCP exit 25
from West to East, make right turn on exit
from East to West make left turn on exit
a block away turn left on Lakeville RD
all the way down approx 3miles to the end of lakeville RD
then contiune on S. 9th st or S.10 st, 2 blocks away you will see 2nd ave
make a left turn on 2nd ave, the you will see 1111 building on your left hand.

People who take LIE
on exit 33 take south of Lakeville RD
all the way to the end approx 5miles, then continue on 9th street.
2 block away from 9th ST take left turn on 2nd ave.
then approx 3 block away, you will see the 1111 2nd ave on your left hand. Next building is 1115

for LIRR
New Hyde Park Station, we are right next to the NHP station.

rrozul09

Hey calvin that hood i JUST a sample right?? If so do you know if the very slight gap on the sides will be closed a little more??

calvinwch

iTrader: (2)

i will give more detail about the gap after the meet, because the car is yellow inside out. Camara was taking direct at the side, that is why it see a large gap.
I have ask the factory technician, due to all fiber item are hand made from a mold. Size on side usualy either little bigger or smaller then the normal one.
since the hood can't be little bigger on the side, because it will touch the fender. Most aftermarket CF hood you see are little smaller then normal one.

i'll give the size when i see the car on that day.

jon527

I'll be there.

Stumpy221

iTrader: (5)

im down

1sweetoz

I WOULD LIKE TO GO TO THE MEET BUT IM IN THE MILITARY SO ILL BE IN FORT DIX THAT WEEKEND

1sweetoz

DOES ANYONE IN HERE KNOW HOW TO GET A HOLD OF CALVIN??????

Smoktout

iTrader: (1)

yea, first u turn ur caps off, then u PM, email, or call him

calvinwch

iTrader: (2)

ya don't use All CAP, you can PM me or call me M-F at 718-898-7198

SWIFT1

iTrader: (1)

i'll definately be at the meet. i want to see this hood in person.

calvinwch

iTrader: (2)

Meet delay:

guys, i have delay the meet until the next coming weekend/Saturday. Which is the March 1.
Due to the snow , we not able to open on this weekend.

My partner is sick, "me" my back is hurt for dig snow over 2 days.

We was able to get the key for the new warehouse this week, but damn snow come down .

I'm hardly can move around, sorry guy i got to move a week late for meet. I'll get Pizza and Drink at that date (March 1), it is on me.

LaNceRiTiZ

iTrader: (10)

cALVIN....
i pmed you in regards to the time frame...for March 1st..
i have worked that day and won't be able to
be there until 3:00 PM.....

calvinwch

iTrader: (2)

are you able to come after work?
give us a time that you can come, i'm sure every one should have no problem with it.

LaNceRiTiZ

iTrader: (10)

i can be there @ 3:00 pM............

calvinwch

iTrader: (2)

Alright, guys the meet will be set at 4pm March 1.