Please read entire post!
Saturday May 8th

Where: Drift office @ Auburn (at there new shop)
1535 Auburn way North
Auburn WA, 98002

Dyno Jet AWD

TUNERS: Lucas English and Aaron (JohnBradley)

Time: We'll start at 11:00 AM

Please note that pricing has changed for this dyno day. The prices we had been using were based off of 3 pulls. Everyone at the dyno day can attest to the fact that almost no car was limited to three pulls. The pricing structure is being changed for this reason.

Going from a stock turbo (8 or 9) to a bigger turbo, will put you into the new tune category.

Dyno price for new tunes will be $100
dyno price for retunes will be $60


Retune – 100
full tune- 200

Additional charges
Add meth - +50 (250)
Add larger injectors- +100 (300)
Add both- +150 (350)
E85- 300
E85 and limp home gas map- 450
AEM- 500
DSMlink- 150
SAFC/MAF-T- 80

Spark plug covers and undertrays must be off before you get on the dyno! There have been alot of people the last 2 dyno days that have not been listening to this warning. If your undertray is not off there will be a nonnegotiable $20 fee to remove it and another $20 to reinstall it.



YOU MUST HAVE YOUR SPARKPLUG COVER AND UNDERTRAY OFF


Saturday the 8th:

1. Sean
2.*.jdmevo8.*
3. arnold
4. boostedwrx
5. divine_evo
6. in the red
7. yahu
8. BLKCarbonEVO
9. Kyle
10.WAIRONWORKER
11. rallyred1234
12. fcapistran

 

Dyno price for new tunes will be $100
dyno price for retunes will be $60


Retune – 100
full tune- 200

does this mean that since it would be my first tune, it would cost me 300? either way, im pretty sure ill be there with a few new goodies.

 

^yes - you aren't in the system so they will start at an earlier point than if you were already established with them.

I've been waiting for this! Hopefully my car will be running, but I'm sure I'll show up regardless! I still owe Bob Diet Coke with Lemon for last time!

Billy - copy/paste errors. May 8th --> Saturday the 12th for the list?

 

put me on there please. this will be my first tune.

 

Add me too!! Sweet I've been bugging Aaron for another south-end dyno day!!!!

Mine will probably be just an E85 retune. I plan on getting my first E85 tune in a week or two..

 

I'm in. I will finally have money for it. Walbro 255 is on order. If I want to convert to speed density, how much will it cost for the parts and tune?

 

Thanks Dan

 

^lookin' out for a brother!

Going to SD, you'll need an omni 4-bar or a JDM MAP sensor (I believe Aaron can work with that) and you might want to make sure your filter will fit on your intake without the MAF (though I don't think that is necessary, but good to check).

 

is it hard to install a MBC?

 

they need to fix the time on the thread thing it says 7:17 and its 8:17

 

shows 8:17 for me, you sure your computer time isn't off?

 

darnnit. it said 7:17 now it says 8:41 my comp is lying to me.

 

I'm sporting the ETS intake. Should I wait to upgrade my FMIC and UICP before going speed density.

My brother installed my EBC so I couldn't tell you.

 

I will be there that's my last saturtday in wa!!

 

Billy, ask Aaron if he wants to tune a honda :P