Mark this thread as Unsold
FS or FT: Sound System (Sub, Amp, Enclosure)
Jul 14, 2004, 12:09 AM
#1
FS or FT: Sound System (Sub, Amp, Enclosure)
Im selling my Audiobahn sound system. It consists of 1 amp and one 12" subwoofer. The amp is in perfect immaculate condition, it has always been kept cool and it contains only 8 hours of heavy use on it (from competition). I blew my old amp and this is a replacement one that has been given to me just a little over a month ago. The subwoofer is roughly a year old. It has 3 very minor dents in the aluminum dustcap (doesnt effect sound in any way). You can't tell it's dented till you get your face up about 2 or so feet from the sub. Here are pix and specs:
200 watts x 2 @ 4 ohms stereo
400 watts x 2 @ 2 ohms stereo
600 watts x 2 @ 1 ohm stereo
1600 watts x 1 @1 ohms mono
High Current Circuitry
PWM MOSFET Power Supply
Double Sided Glass Epoxy Circuit Board
S/N Ratio: >100dB
Frequency Response: 10Hz - 40KHz (± 1dB)
Remote Bass Control with Blue Backlight Knobs
Variable 24dB Hi-pass Crossover: 50Hz - 750Hz
Variable 24dB Low-pass Crossover: 30Hz - 120Hz
Variable Subsonic Filter: 20Hz to 45Hz
Variable Bass Boost: 0-18dB
Variable Bass Boost Frequency: 40Hz-100Hz
RCA Throughput Connections
4-way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset
Dual Cooling Fans
VU Meters Indicating Output Response
Cobalt Blue Illumination
High Gloss Chrome Plated Finish
Dimensions (H x W x D): 3.5" x 12" x 24"
200oz. Magnet Weight
2000 RMS Power Handling
23Hz - 700Hz Frequency Response
93.5dB Efficiency
3" Dual 2 Ohms Voice Coil
7-7/8" Mounting Depth
11-1/4" Hole Cutout
12-1/2" Outer Diameter
Proprietary Tall Excursion Foam Surround
Allows For Maximum Excursion and Maximum Cone Surface Area
ultra light 2-layer Carbon Fiber, Kevlar® Cone with Aluminum Dustcap
Triple Stack Magnet Diamond Cut Cast Basket 25mm Top Plate for Increased Efficiency
Dual Voice Coil Wound on Black Anodized Aluminum Former
The wattage is listed by RMS (Constant power, not peak power). Multiply the wattage as listed by 2 to get peak power. Audiobahn always rates products by RMS power and not by Peak.
The subwoofer is currently in a 4 cubic foot ported box (tuned to 30hz) custom built by myself. This box is made for competition, it can get VERY loud. If you want a smaller and more stealth enclosure, i can custom fiberglass a wheel well enclosure to fit either with OR without the spare in the trunk.
Please make serious offers, either PM me or IM me on AIM (Iamkar33m) or email me Iamkar33m@aol.com
P.S. If you're local and you want to hear/see the system, let me know.
200 watts x 2 @ 4 ohms stereo
400 watts x 2 @ 2 ohms stereo
600 watts x 2 @ 1 ohm stereo
1600 watts x 1 @1 ohms mono
High Current Circuitry
PWM MOSFET Power Supply
Double Sided Glass Epoxy Circuit Board
S/N Ratio: >100dB
Frequency Response: 10Hz - 40KHz (± 1dB)
Remote Bass Control with Blue Backlight Knobs
Variable 24dB Hi-pass Crossover: 50Hz - 750Hz
Variable 24dB Low-pass Crossover: 30Hz - 120Hz
Variable Subsonic Filter: 20Hz to 45Hz
Variable Bass Boost: 0-18dB
Variable Bass Boost Frequency: 40Hz-100Hz
RCA Throughput Connections
4-way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset
Dual Cooling Fans
VU Meters Indicating Output Response
Cobalt Blue Illumination
High Gloss Chrome Plated Finish
Dimensions (H x W x D): 3.5" x 12" x 24"
200oz. Magnet Weight
2000 RMS Power Handling
23Hz - 700Hz Frequency Response
93.5dB Efficiency
3" Dual 2 Ohms Voice Coil
7-7/8" Mounting Depth
11-1/4" Hole Cutout
12-1/2" Outer Diameter
Proprietary Tall Excursion Foam Surround
Allows For Maximum Excursion and Maximum Cone Surface Area
ultra light 2-layer Carbon Fiber, Kevlar® Cone with Aluminum Dustcap
Triple Stack Magnet Diamond Cut Cast Basket 25mm Top Plate for Increased Efficiency
Dual Voice Coil Wound on Black Anodized Aluminum Former
The wattage is listed by RMS (Constant power, not peak power). Multiply the wattage as listed by 2 to get peak power. Audiobahn always rates products by RMS power and not by Peak.
The subwoofer is currently in a 4 cubic foot ported box (tuned to 30hz) custom built by myself. This box is made for competition, it can get VERY loud. If you want a smaller and more stealth enclosure, i can custom fiberglass a wheel well enclosure to fit either with OR without the spare in the trunk.
Please make serious offers, either PM me or IM me on AIM (Iamkar33m) or email me Iamkar33m@aol.com
P.S. If you're local and you want to hear/see the system, let me know.
