IX RS Build
Feb 8, 2009 | 08:11 PM
#665
Well Lana never seems to disappoint. She never skipped a beat. There were absolutely no changes made again from the time it left the dyno. Crispeeds tunes are amazing. It was a short 2 full runs, but it managed to squeek the record. I will have to work on lowering it a bit before someone takes it right back
So as I posted elsewhere:
Thanks Mike and everyone at AWD for always going above and beyond. Thank you David Buschur for building me a bas azz motor and continuously helping us. Thank you Robert at Forced Performance for your support and for supplying the RED. Thank you Tom at Driven Innovation's for a beautiful intake manifold and hypertune TB. Thank you Craig at Spark Tech for a flawless ignition system. Thank you Q and everyone at EPM for the custom 02 dump and continuous support. And to Rolo and everyone at CFT for getting this project started. I also want to thank 9sec9 and Indyevo for behind the scenes help. The combination of team, parts, and dedication are hard to beat. Stay tuned for round 3.....
So as I posted elsewhere:
Thanks Mike and everyone at AWD for always going above and beyond. Thank you David Buschur for building me a bas azz motor and continuously helping us. Thank you Robert at Forced Performance for your support and for supplying the RED. Thank you Tom at Driven Innovation's for a beautiful intake manifold and hypertune TB. Thank you Craig at Spark Tech for a flawless ignition system. Thank you Q and everyone at EPM for the custom 02 dump and continuous support. And to Rolo and everyone at CFT for getting this project started. I also want to thank 9sec9 and Indyevo for behind the scenes help. The combination of team, parts, and dedication are hard to beat. Stay tuned for round 3.....
Feb 8, 2009 | 08:14 PM
#666
Feb 8, 2009 | 08:26 PM
#667
Brian, the Wilson Diff Eliminator will be on the way via the big brown truck Monday. I have gone over the install with Mike and we are looking forward to you're evaluation. We are getting the mounts and hardware together for Wilson D Rail fuel rail that Mike already has at the shop and will have them ready for pick up soon. Thanks, Indy
Feb 8, 2009 | 08:42 PM
#669
Thanks Brian, I am also looking forward to the testing. With so many components to design, build, and test, 9sec9 and I only have so much time to work with. With your help testing the Diff Eliminator, this get us further along and will free us up to design the next component on the list. Thanks again for including Wilson Manifolds components in your build. Indy
Feb 8, 2009 | 10:31 PM
#674
Evolving Member
Joined: Jan 2009
Posts: 162
Likes: 0
From: Boynton Beach, Fl
Check out the guy in the Camaro Grillin Lana
Sorry, you're GM can't keep up. Now go add another quart of oil before you're engine starts to run low.I got clips of Brian sliding all over the place in first and second. Anyone wanna see?