The evolution of my Evo IX RS Wicked White
#128
having some fun chasing my friend in the s2k at Summit Point Main last weekend.
http://www.youtube.com/watch?v=5vGPoWk_xdM
http://www.youtube.com/watch?v=NP_Y5it_3EU
http://www.youtube.com/watch?v=5vGPoWk_xdM
http://www.youtube.com/watch?v=NP_Y5it_3EU
#131
Account Disabled
iTrader: (26)
Join Date: Jul 2011
Location: Clinton, NJ - Myrtle Beach, SC
Posts: 1,784
Likes: 0
Received 1 Like
on
1 Post
Nice headlight duct, looks great! I will probably end up doing the same once I remove my ACD stuff. What did you use to seal the headlight once the duct was installed so it doesn't leak?
#132
^ i use black RTV silicon sealant. just put a bead round the flange and squish it in, then wipe of the excess.
here's some description https://www.evolutionm.net/forums/ev...ight-duct.html
why are you removing ACD, or relocating? i wouldn't mind relocating it to the back for better weight distribution.
here's some description https://www.evolutionm.net/forums/ev...ight-duct.html
why are you removing ACD, or relocating? i wouldn't mind relocating it to the back for better weight distribution.
#133
Account Disabled
iTrader: (26)
Join Date: Jul 2011
Location: Clinton, NJ - Myrtle Beach, SC
Posts: 1,784
Likes: 0
Received 1 Like
on
1 Post
^ i use black RTV silicon sealant. just put a bead round the flange and squish it in, then wipe of the excess.
here's some description https://www.evolutionm.net/forums/ev...ight-duct.html
why are you removing ACD, or relocating? i wouldn't mind relocating it to the back for better weight distribution.
here's some description https://www.evolutionm.net/forums/ev...ight-duct.html
why are you removing ACD, or relocating? i wouldn't mind relocating it to the back for better weight distribution.
#135
upgrade the power steering cooler so i can remove the hard line and have more room for oil cooler up front.
fittings for the oil cooler
upper bracket for the oil cooler
oil cooler up front and power steering cooler mounted
i have this Setrab 40 row oil cooler but it's going to take some modding the rad support to fit it. i didn't have time so i just put the stock one up front for now.
tap this Defi oil temp sensor into oil drain plug because i had to use the port on the oil filter housing for FP oil feed line for turbo.
fittings for the oil cooler
upper bracket for the oil cooler
oil cooler up front and power steering cooler mounted
i have this Setrab 40 row oil cooler but it's going to take some modding the rad support to fit it. i didn't have time so i just put the stock one up front for now.
tap this Defi oil temp sensor into oil drain plug because i had to use the port on the oil filter housing for FP oil feed line for turbo.