"Beebo" VIII
#1
"Beebo" VIII BBK Full + bolt ons + E85 = 447/393
Bought my Evo that was pratically bone stock in November '10. My last car was a stock '99 Civic so I figured a stock Evo wouldn't need mods to be fun. Well that lasted like a week until I started to order parts. It's become quite a money pit now! A buddy of mine has been nice enough to do most of the work with me helping with what I can. Fortunately, I am almost to my goal...I hope!!!
When I bought it in November '10
By sparrow9998 at 2012-06-03
This is what I currently have as far as power/performance up to date:
Suspension/bracing/bushings:
Whiteline 24mm rear sway
Whiteline rear strut brace
Whiteline rear diff bushings
Whiteline rear bump steer bushings
RS trunk bar
AMS motor mounts - front and both sides
Buschur under hood/under console bushings
Torque Solutions driveshaft bushings
Swift Sport springs on stock KYB's
Power/Drivetrain
GSC S2 cams/springs/retainers
Megan Racing TBE
Cobb intake
Spoolin' Up COP
Map LICP
ETS 3.5" intercooler
MR DV
Walbro 255
Competition stage 3.5
ACT Prolite flywheel
STM SS clutch line
Clutch pill delete
GM 3 port boost selenoid
CBRD tuned 305/295 @24psi (mustang dyno)
And some non-peformance/power:
Rally Armor mud flaps
Black vortex generator
Rexpeed hood vent
Rexpeed side spats
Black trunk badge
Prosport CF hood dampers
AEM digital wideband
AEM digital boost guage
Tint - 25% rear, 35% front
JDM tails
HID headlight conversion 6k
Ebay front lip in black
Greddy Turbo Timer
I have also used some dry CF wrap on my wing insert, side spats, interior trim as well as black sueded on the pillars. A bit ricey but I love the way it looks! Plus I re-painted the once pinkish Brembo's to black.
ETS 3.5"
By sparrow9998 at 2012-06-03
Spoolin' Up COP
By sparrow9998 at 2012-06-03
Diggin' in - added GSC S2 cams/springs/retainers, 60K, 6K HID's, Cobb intake
By sparrow9998 at 2012-06-03
Rexpeed vent
By sparrow9998 at 2012-06-03
Ebay lip
By sparrow9998 at 2012-06-03
Painted Brembo's
By sparrow9998 at 2012-06-03
At CBRD in August '11 where it got tuned (Mustang Dyno) 305/295 @24psi on 93oct and added Whiteline rear bump steer kit
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-06-03
Clutch/Flywheel/STM SS clutch line/clutch pill delete - Competition Clutch Stage 3.5, Act ProLite Flywheel (the nightmare clutch job)
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-06-03
Wheels/springs - 18"x9" Racing Hart CP-F Tune and Swift Sport springs (on stock KYB's)
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-05-23
Parts for upcoming round
BBK Full ported
MAP Long Runner exhaust manifold
Buschur ported intake manifold
Buschur 65mm ported throttle body
Synapse Synchronic BOV
PTE 1000cc injectors
CBRD UICP/battery tray
Whiteline Roll Center Kit
Weapon R P.S. reservoir
JM Fab coolant overflow can
MAP O2 dump
Whiteline Precision Steering Kit
MAP cam angle sensor shield
ETS hard upper rad pipe
Perrin P.S.R.S.
By sparrow9998 at 2012-06-03
Bonus: CF wrapped stink bug!
By sparrow9998 at 2012-06-03
When I bought it in November '10
By sparrow9998 at 2012-06-03
This is what I currently have as far as power/performance up to date:
Suspension/bracing/bushings:
Whiteline 24mm rear sway
Whiteline rear strut brace
Whiteline rear diff bushings
Whiteline rear bump steer bushings
RS trunk bar
AMS motor mounts - front and both sides
Buschur under hood/under console bushings
Torque Solutions driveshaft bushings
Swift Sport springs on stock KYB's
Power/Drivetrain
GSC S2 cams/springs/retainers
Megan Racing TBE
Cobb intake
Spoolin' Up COP
Map LICP
ETS 3.5" intercooler
MR DV
Walbro 255
Competition stage 3.5
ACT Prolite flywheel
STM SS clutch line
Clutch pill delete
GM 3 port boost selenoid
CBRD tuned 305/295 @24psi (mustang dyno)
And some non-peformance/power:
Rally Armor mud flaps
Black vortex generator
Rexpeed hood vent
Rexpeed side spats
Black trunk badge
Prosport CF hood dampers
AEM digital wideband
AEM digital boost guage
Tint - 25% rear, 35% front
JDM tails
HID headlight conversion 6k
Ebay front lip in black
Greddy Turbo Timer
I have also used some dry CF wrap on my wing insert, side spats, interior trim as well as black sueded on the pillars. A bit ricey but I love the way it looks! Plus I re-painted the once pinkish Brembo's to black.
ETS 3.5"
By sparrow9998 at 2012-06-03
Spoolin' Up COP
By sparrow9998 at 2012-06-03
Diggin' in - added GSC S2 cams/springs/retainers, 60K, 6K HID's, Cobb intake
By sparrow9998 at 2012-06-03
Rexpeed vent
By sparrow9998 at 2012-06-03
Ebay lip
By sparrow9998 at 2012-06-03
Painted Brembo's
By sparrow9998 at 2012-06-03
At CBRD in August '11 where it got tuned (Mustang Dyno) 305/295 @24psi on 93oct and added Whiteline rear bump steer kit
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-06-03
Clutch/Flywheel/STM SS clutch line/clutch pill delete - Competition Clutch Stage 3.5, Act ProLite Flywheel (the nightmare clutch job)
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-06-03
Wheels/springs - 18"x9" Racing Hart CP-F Tune and Swift Sport springs (on stock KYB's)
By sparrow9998 at 2012-06-03
By sparrow9998 at 2012-05-23
Parts for upcoming round
BBK Full ported
MAP Long Runner exhaust manifold
Buschur ported intake manifold
Buschur 65mm ported throttle body
Synapse Synchronic BOV
PTE 1000cc injectors
CBRD UICP/battery tray
Whiteline Roll Center Kit
Weapon R P.S. reservoir
JM Fab coolant overflow can
MAP O2 dump
Whiteline Precision Steering Kit
MAP cam angle sensor shield
ETS hard upper rad pipe
Perrin P.S.R.S.
By sparrow9998 at 2012-06-03
Bonus: CF wrapped stink bug!
By sparrow9998 at 2012-06-03
Last edited by Beebo05; Sep 13, 2012 at 02:51 AM.
#5
Evolved Member
iTrader: (44)
The car has come a long way, and the mods have been very tasteful and perfect for the street. I'm sure after this round you'll be satisfied for a little while!
How does the car feel on the street with those motor mounts? I'm a little worried, as I just installed a 4pc Avid set of solid mounts, and don't want my car to vibrate apart .
I feel like a set of VII tails would completely set your car off, 110%.
For example:
Most importantly, good luck!
How does the car feel on the street with those motor mounts? I'm a little worried, as I just installed a 4pc Avid set of solid mounts, and don't want my car to vibrate apart .
I feel like a set of VII tails would completely set your car off, 110%.
For example:
Most importantly, good luck!
#7
The car has come a long way, and the mods have been very tasteful and perfect for the street. I'm sure after this round you'll be satisfied for a little while!
How does the car feel on the street with those motor mounts? I'm a little worried, as I just installed a 4pc Avid set of solid mounts, and don't want my car to vibrate apart .
I feel like a set of VII tails would completely set your car off, 110%.
For example:
Most importantly, good luck!
How does the car feel on the street with those motor mounts? I'm a little worried, as I just installed a 4pc Avid set of solid mounts, and don't want my car to vibrate apart .
I feel like a set of VII tails would completely set your car off, 110%.
For example:
Most importantly, good luck!
Last edited by Beebo05; Jul 4, 2012 at 05:52 AM.
Trending Topics
#8
All the parts installed! Here is what it ended up with after a tune - 372/314. She is loud with that dump!
By sparrow9998 at 2012-07-06
By sparrow9998 at 2012-07-06
Last edited by Beebo05; Jul 6, 2012 at 09:51 AM.
#9
Got a few things to add to my build including a 93/E85 tune.
Parts installed - Rotorpros slotted rotors, Hankook V12's, Redline armrest cover/shifter boot/e-brake boot, Flossy knob, Mitsu 4 bar map sensor, Perrin PSRS.
Parts to be installed - Redline steering wheel cover, APR rear bumper diffuser, Blackcat gauges, Carbing 6 point (going to refinish this part since it's a bit beat up).
I'll throw up some pics eventually.
And the tune from PSI PROformance
E85 - 447/393
93 - 413/360
By sparrow9998 at 2012-09-02
Parts installed - Rotorpros slotted rotors, Hankook V12's, Redline armrest cover/shifter boot/e-brake boot, Flossy knob, Mitsu 4 bar map sensor, Perrin PSRS.
Parts to be installed - Redline steering wheel cover, APR rear bumper diffuser, Blackcat gauges, Carbing 6 point (going to refinish this part since it's a bit beat up).
I'll throw up some pics eventually.
And the tune from PSI PROformance
E85 - 447/393
93 - 413/360
By sparrow9998 at 2012-09-02
Last edited by Beebo05; Sep 2, 2012 at 04:17 AM.
#11
here is the baseline - car was acting up a bit - going very lean and pulling timing pretty hard - had to get out of it for the engines sake.
Last edited by smelly240; Sep 2, 2012 at 06:40 AM.
#12
Perrin PSRS installed by PSI
By sparrow9998 at 2012-09-03
APR rear bumper diffuser - Fitment was not quite dead on.
By sparrow9998 at 2012-09-03
Too bad it didn't cover those scuffs! Notice the small gap at the top corner. I couldn't get rid of that.
By sparrow9998 at 2012-09-03
By sparrow9998 at 2012-09-03
Flossy knob, Redline shifter boot (good fitment), matte black CF vinyl
By sparrow9998 at 2012-09-03
By sparrow9998 at 2012-09-03
matte black CF vinyl
By sparrow9998 at 2012-09-03
Redline armrest cover - It's quite beefy with the extra padding. Fitment is good.
By sparrow9998 at 2012-09-03
Custom trunk carpet bought on EvoM - A nice little upgrade to that ghetto OEM carpet.
By sparrow9998 at 2012-09-03
Carbing 6 point brace
By sparrow9998 at 2012-09-05
Grimmspeed master cylinder brace
By sparrow9998 at 2012-09-05
Satin black vinyl for the roof. I did this by myself and it turned out decent.
By sparrow9998 at 2012-09-05
By sparrow9998 at 2012-09-05
By sparrow9998 at 2012-09-03
APR rear bumper diffuser - Fitment was not quite dead on.
By sparrow9998 at 2012-09-03
Too bad it didn't cover those scuffs! Notice the small gap at the top corner. I couldn't get rid of that.
By sparrow9998 at 2012-09-03
By sparrow9998 at 2012-09-03
Flossy knob, Redline shifter boot (good fitment), matte black CF vinyl
By sparrow9998 at 2012-09-03
By sparrow9998 at 2012-09-03
matte black CF vinyl
By sparrow9998 at 2012-09-03
Redline armrest cover - It's quite beefy with the extra padding. Fitment is good.
By sparrow9998 at 2012-09-03
Custom trunk carpet bought on EvoM - A nice little upgrade to that ghetto OEM carpet.
By sparrow9998 at 2012-09-03
Carbing 6 point brace
By sparrow9998 at 2012-09-05
Grimmspeed master cylinder brace
By sparrow9998 at 2012-09-05
Satin black vinyl for the roof. I did this by myself and it turned out decent.
By sparrow9998 at 2012-09-05
By sparrow9998 at 2012-09-05
Last edited by Beebo05; Sep 11, 2012 at 11:45 PM.