razorlab's simple build(s)
#1036
EvoM Guru
iTrader: (1)
They're almost as black as mine ![Wink](https://www.evolutionm.net/forums/images/smilies/wink.gif)
Is it a heat issue, or do you also feel like there isn't enough stopping power? I'm just trying to gauge what my car is going to need when it's done because it will also very likely be around 500whp on a track tune.
![Wink](https://www.evolutionm.net/forums/images/smilies/wink.gif)
Is it a heat issue, or do you also feel like there isn't enough stopping power? I'm just trying to gauge what my car is going to need when it's done because it will also very likely be around 500whp on a track tune.
#1037
EvoM Guru
iTrader: (1)
My calipers at Chuckwalla this year. I caught the dust boots on fire too...lol
#1039
EvoM Community Team Leader
Is there any paint that you guys have used that can deal with these heat levels or do you have to powder coat? I'm about to pull my brembos for some needed love.
Last edited by Biggiesacks; Mar 30, 2018 at 11:33 AM.
#1040
EvoM Community Team Leader
i guess if you want to do it like brembo you need to do a 3 stage paint job, epoxy primer->urethane base->acrylic clear coat, all of which im assuming need to be rated at high braking temps.
http://www.brembo.com/en/company/new...alipers-brembo ...just you know.. ignore their point about not doing it lol
http://www.brembo.com/en/company/new...alipers-brembo ...just you know.. ignore their point about not doing it lol
#1042
Note APP is still WOT (because I was), while TPS and others are doing the zig zags.
https://datazap.me/u/razorlab/thunde...om=27815-28188
#1043
EvoM Community Team Leader
I'll usually start chasing down electrical gremlins by inspecting the chassis grounds, and the harness in general. Maybe something is loose or corroded, ground looping can cause all kinds of havoc.
Last edited by Biggiesacks; Apr 1, 2018 at 08:08 AM.
#1046
EvoM Community Team Leader
Did you check to see if they are stuck together. I literally just got the same thing delivered today from rock auto and it looked like there where only 3 seals but one was just stuck inside of another and they looked like one.
#1047
I opened them tonight when I got home and the one pack I thought was missing two seals is just missing one, so only three in total overall and missing one. Also one pack has grey dust boots and one has black dust boots. Again, not sure how I feel about this quality control...
#1048
EvoM Community Team Leader
I opened them tonight when I got home and the one pack I thought was missing two seals is just missing one, so only three in total overall and missing one. Also one pack has grey dust boots and one has black dust boots. Again, not sure how I feel about this quality control...
#1050
Evolved Member
I bought OE Mitsubishi/brembo caliper overhaul set and, you guessed it, one seal missing.. LOL