"Project Hard Park"
The following users liked this post:
V.8MR (Dec 3, 2019)
#888
Havent had time to do much of anything... Did some trimming and mocked up gauges. Also picked up an IRP shifter and got it installed. Needs some adjustment as it has a hard time finding reverse, but again no time to play lately.
In a couple weeks my JDM Fanboi Evo3 arrives on the east coast and I'm taking the 13hr drive to pick it up. Excited
In a couple weeks my JDM Fanboi Evo3 arrives on the east coast and I'm taking the 13hr drive to pick it up. Excited
The following users liked this post:
Ayoustin (Feb 27, 2020)
#892
Evolving Member
How are the hard race ball joints holding up? There is not much data on their longevity so I was wondering how they are working out for you?
I started a thread on ball joint replacements:
https://www.evolutionm.net/forums/ev...ings-more.html
I started a thread on ball joint replacements:
https://www.evolutionm.net/forums/ev...ings-more.html
The following users liked this post:
huzzle101 (Apr 27, 2020)
The following users liked this post:
huzzle101 (Apr 29, 2020)
#899
Finally got around to installing bumper quick releases. Much better than having to jack front up to remove the bumper. Was some generic kit on FB and it took some cutting and grinding to fit right. You can also see some of the hammer work/beating Ive been doing to the pinch weld behind the front tire. Gonna pretty it up and shoot some paint at it. Also gonna trim some of the plastic and alum in the side skirt area to help with tire interference.